424407
6
Zoom out
Zoom in
Previous page
1/22
Next page
Section 1 Safety Guidelines User Guide
Page 1 - 2 EchoStar International Corporation
© 2004 EchoStar International Corporation
All rights reserved
4. ELECTRICAL SAFETY
When you use or connect electrical equipment,
always obey the safety regulations as
applicable in your country, to reduce the risk of
fire, electrical shock and personal injury.
Read and comply at least with the given safety
instructions.
Always make sure that the electrical power
supply corresponds with the voltage on the
electrical identification plate on the
equipment next to the electrical connection.
Your equipment is double insulated in
compliance with the standards as stated in
the EC Declaration of Conformity; therefore
no additional earth wire is required, though
the use of an earth leak switch and/or over
voltage protection switch is recommended.
Only use an approved extension
(convenience) lead suitable for the electrical
power consumption of the installed
equipment.
Only use an original or by EchoStar
International Corporation approved AC/DC
adapter.
The AC/DC adapter is only meant for use
with the related EchoStar terrestrial receiver.
Always first disconnect the AC/DC adapter
from the mains before you disconnect the
connector at the receiver.
If another 12Vdc/24Vdc source is applied,
use a suitable rated fuse. Make sure the
power supply to the receiver is protected
against a short circuit situation.
4.1. AC/DC ADAPTER
1) Receiver connector, 2) Mains connector
4.2. LOGOS
The CE logo.
This logo tells you that the receiver is
following the provisions of Council
Directive 89/336/EEC on the
approximation of the laws of the Member
States relating to the electromagnetic
compatibility and the provisions of Council
Directive 73/23/EEC and 93/68/EEC on
the approximation of the laws of the
Member States relating to low voltage and
electrical safety.
The double insulation logo.
This logo tells you that the receiver is
electrically safe within the normal use of
the receiver as stated in the safety
chapter.
The 12/24Vdc connector identification
This logo tells you that the outer contact is
the - contact.
The Digital Video Broadcasting logo.
This logo tells you that this equipment is
compliant with the DVB standards as
registered under registration number
2
1
5. ENVIRONMENTAL SAFETY
Most of the packaging materials can be
recycled. Please discard these materials in an
environmental safe manner.
5.1. BATTERIES
Unsafely disposed batteries can be hazardous
to your environment.
ENVIRONMENTAL REMARK
Dispose the packaging in an environmental
safe manner. Please inform yourself on local
regulations with respect to the disposal of
reusable materials.
ENVIRONMENTAL REMARK
Dispose used batteries in an environmental
safe manner. Please inform yourself on local
regulations with respect to the disposal of
batteries.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Echostar t 222 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Echostar t 222 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info