424565
15
Zoom out
Zoom in
Previous page
1/52
Next page
Familiarization
Section 4
EchoStar International Corporation Page 4 - 1
© 2002 EchoStar International Corporation
All rights reserved
4
FAMILIARIZATION
1. ECHONAV 2.2
The software of the receiver contains the EchoNAV user interface with on-screen help, which
gives you easy control over the features of the receiver. The software contains also a large
database of pre-programmed satellites and transponders which are used for a quick
installation. For initial installation, the software guides you through the required setup menu to
allow for an easy and reliable installation setup of the receiver.
FEATURE HIGHLIGHTS
The highlights for this version are:
New menu languages added;
Portuguese, Dutch.
Revised help lines and related translations;
All menu texts are revised to give more support and information. All menu languages are
translated accordingly.
Several small menu changes incorporated:
- LNB power option in system setup menu for SMATV deleted,
- Time zone option in Local time menu deleted,
- Software identification in About EchoStar menu is changed to show EchoNAV version.
Revised subtitle behavior;
Greek and Russian subtitle support is added.
Multi-lingual language support for EPG added;
If available form the service provider, EPG language is shown in the language which is set
for the menu language (user preferences - Languages - Menu).
Revised conditional access to support smartcards type PC2.4;
The embedded Viaccess smartcard reader is revised to support the latest generation of
PC2.4 smartcards as used by several service providers who use Viaccess encryption.
Revised channel numbering for Current SAT list;
The Current SAT list is revised to have it’s own channel numbering. Therefore the channel
numbering (only for Current SAT) starts at 1 for each satellite. Note that also the satellite
name is shown permanently.
New installation menus added for multiple LNB support;
The installation menu is revised to support Easy and Advanced installation. In the
advanced installation you can define user defined LNBs where the Easy installation allows
for the installation of pre-defined LNBs.
Revised Add SAT, TP and PID menus;
The Add SAT, Add TP, and Add PID are combined in one menu Add data.
New option to add satellite or transponder during initial installation setup added;
Add Data menu is accessible from the initial setup and after installation from the channel
list through the ‘white edit’ menu.
OTA service added on ASTRA1, 19.2 East.
DVR timer modified to allow for recording a relative time block;
The DVR timer is directly accessible after a recording is started. You can set the stop time
either in absolute time (13:00 hr) or relative time (+ 00:15 min).
Updated satellite/transponder database,
You have to perform a factory reset to activate the database, failing to do so keeps the
previous database active.
Downloaded from www.Manualslib.com manuals search engine
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Echostar dvr 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Echostar dvr 5000 in the language / languages: English as an attachment in your email.

The manual is 7,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info