424565
7
Zoom out
Zoom in
Previous page
1/52
Next page
Installation
Section 3
EchoStar International Corporation Page 3 - 1
© 2002 EchoStar International Corporation
All rights reserved
3
INSTALLATION
1. TO SETUP YOUR RECEIVER FOR THE FIRST TIME
This procedure supersedes the procedure as given in the user manual from step 15 onwards.
The main differences are:
Select Easy or Advanced installation,
Easy installation helps you to do the initial setup procedure where Advanced allows you to
program the receiver as required for non-standard installations.
Add a new satellite,
In a satellite field you can select any known satellite in range from the database or add
your own defined satellite with the use of the S00 satellite.
Add a new transponder,
In a transponder field you can select any known transponder from the database or add
your own defined transponder with the use of the TP00 transponder.
FOR ALL CONFIGURATIONS
FOR FIXED AND DISEQC 1..4 SWITCH CONFIGURATIONS - EASY
NOTE
From the next step onwards, the procedure is divided in different configurations. The
configurations are; Fixed, Motorized and SMATV.
Fixed means set up a single dish or multiple dishes with DiSEqC1..4 switch;
Motorized means set up a moveable dish (motor/actuator by positioner);
SMATV means set up for television distribution (cable network in buildings).
1. Make the required selections.
2. Read the available help text for information.
3. Go to the Save settings field to confirm the time.
4. On the RCU, press the OK key to set the time.
Note that the local time is shown correctly.
5. Go to the Continue field.
6. On the RCU, press the OK key to advance
21. Make the required selections.
22. Set the required installation mode, recommended
setting is Easy (guided setup procedure).
23. Read the available help text for information.
Note that only the white fields are selectable, other
fields show reference information.
24. If you want to add your own defined satellite, go to
the SAT field and select S00 (Goes to the menu
where you can define your own satellite, for
detailed information, refer to section 6). If not
proceed with step 25.
25. Go to the Check signal field.
26. On the RCU, press the OK key to advance.
Downloaded from www.Manualslib.com manuals search engine
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Echostar dvr 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Echostar dvr 5000 in the language / languages: English as an attachment in your email.

The manual is 7,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info