424459
30
Zoom out
Zoom in
Previous page
1/48
Next page
Description and Operation
Page 2 - 16 EchoStar International Corporation
© 2004 EchoStar International Corporation
All rights reserved
Installation setup Factory reset
1. User settings It is advised to write down the most important settings before you confirm the Factory reset
(e.g. Switch and Port settings, LNBs, User preferences, etc.).
If you select Yes, the receiver is ready to do a Factory reset.
Confirm If you select Confirm, the receiver deletes all user defined settings, channels, timers and
(favorite) lists and replace them with the factory defaults. If a Factory reset is done after a
Software upgrade, the latest satellite and transponder database is activated.
When the Factory reset is completed, the receiver shows the initial installation procedure as if
the receiver came out of the box.
Installation setup About EchoStar
This menu shows all the relevant company, receiver and EchoNAV Xpress information.
Installation setup Set limits
(motorized only)
CAUTION
On a motorized dish, set the physical East and West limit switches first. Failing to do so might
cause damage to your motorized dish installation or other properties.
1. EL Set the (software controlled) maximum dish position (East limit).
Green: to delete the current El and WL.
2. WL Set the (software controlled) maximum dish position (West limit).
Green: to delete the current El and WL.
3. My longitude (USALS only); Set the longitude for the installation site of the dish, you can obtain your
longitude from Stab at: www.usals.info.
Yellow: If a USALS mount is out of position, you can re-calibrate the position of the dish with
the command: Go to 0. Allow the dish some time to re-calibrate and return to the SAT.
4. My latitude (USALS only); Set the longitude for the installation site of the dish, you can obtain your latitude
from Stab at: www.usals.info.
Yellow: If a USALS mount is out of position, you can re-calibrate the position of the dish with
the command: Go to 0. Allow the dish some time to re-calibrate and return to the SAT.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Echostar dsb 890 2ci at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Echostar dsb 890 2ci in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info