424459
25
Zoom out
Zoom in
Previous page
1/48
Next page
Description and Operation
www.echostar-int.com Page 2 - 11
© 2004 EchoStar International Corporation
All rights reserved
User preferences Languages
1. Pre-programmed lists Shows the pre-programmed channel list that you use as defined during the initial installation.
For detailed information about the pre-programmed channel lists, please refer to the appendix.
2. Menu To set the language you want to use in the menus.
3. 1st Audio To set the language for programs with multi-lingual audio. For multi-lingual programs, if
available, you can choose your own language. The receiver will first look for the 1st selected
language, if not available, for the 2nd. If the two selected languages are not transmitted, audio
is given in the native language of that channel.
4. 2nd Audio
5. 1st Subtitle To set the language for programs with multi-lingual subtitles. For multi-lingual programs, if
available, you can choose your own language. The receiver will first look for the 1st selected
language, if not available, for the 2nd. If the two selected languages are not transmitted, no
subtitle is shown. If you do not want to have any subtitles, select Off.
6. 2nd Subtitle
7. 1st EPG To set the language for programs with multi-lingual EPG. For multi-lingual EPG, if available,
you can choose your own language. The receiver will first look for the 1st selected language, if
not available, for the 2nd. If a selected language is not transmitted, the information is shown in
the native language of that channel.
8. 2nd EPG
9. Teletext To set the language you want to use for the Teletext. For multi-lingual Teletext, if available,
Teletext is shown in the selected language. If a selected language is not transmitted, Teletext
is shown in the native language of that channel.
User preferences Parental control
Factory default: PIN-code 0 0 0 0
1. Receiver lock To lock the receiver completely for unauthorized users. If you select On, you only can gain
access with the PIN-code after you have set the receiver to standby.
2. Installation lock To lock the Installation setup and Edit menu for unauthorized users. Note that the Installation
lock comes on automatically after you have set a channel lock.
3. Master channel lock To lock or unlock all locked selections at once. You can temporarily undo all channel locks in
one go. Note that all channel locks are automatically set again when you switch the receiver to
standby.
4. List access
TV
Radio
After you have created the favorite lists, you can limit the access to a specific list. This means
that all other lists are temporarily removed and that you only can use the selected list. Note
that the edit menu is also disabled to prevent unauthorized access.
Change PIN-code To type in the factory default or personal PIN-code. Note that this PIN-code is only for the
EchoNAV user interface and not for the Smartcard.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Echostar dsb 890 2ci at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Echostar dsb 890 2ci in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info