424459
22
Zoom out
Zoom in
Previous page
1/48
Next page
Description and Operation
Page 2 - 8 EchoStar International Corporation
© 2004 EchoStar International Corporation
All rights reserved
Red key - Add SAT, Green key - Edit SAT.
Red key - Add TP, Green key - Edit TP.
Red key - Add Channel, Green key - Edit
Channel (Video, Audio, PCR PID).
8. EDIT - ADD/EDIT SATELLITE, TRANSPONDER, CHANNEL (PID)
NOTE
You only need to add a satellite and/or transponder if it is not available from the internal
database. When you add a satellite, you have to identify at least one transponder. You only
need to change PIDs when your service provider changes the channel. A digital signal is
basically broken up in Video and Audio information which are synchronized with the PCR PID.
I
F YOU WANT TO ADD A NEW
SATELLITE:
1. Press the MENU key.
2. Select: Installation setup -
Edit
3. Press the Red key.
4. Enter the required SAT
name.
5. Press the Green key.
6. Set the orbital position:
Degrees and Location.
7. Set the first transponder:
Frequency, Polarity and
Symbol rate.
8. Leave the Channel as
unchanged.
9. Select Confirm.
10. For fixed installations:
Select System setup.
11. Allocate the SAT to a Port.
12. Press the MENU key.
13. Select Program SAT.
14. Select the required Search
mode.
15. Select confirm and press the
OK key.
16. Select Search channels and
press the OK key.
I
F YOU WANT TO ADD A
TRANSPONDER:
1. Press the key.
2. Select the required SAT.
3. Press the MENU key.
4. Select: Installation setup -
Edit
5. Select Frequency and press
the Red key.
6. Add the new transponder:
a. Set the Frequency and
press the OK key.
b. Set the Polarity.
c. Press the OK key to set
the Symbol rate.
7. Leave the Channel as
unchanged.
8. Make sure, the signal
indicator shows a reading.
9. Select Confirm.
10. Select Program SAT.
11. Select the required Search
mode.
12. Select Search channels and
press the OK key.
I
F YOU WANT TO ADD A CHANNEL:
1. Press the key.
2. Select the required SAT.
3. Press the MENU key.
4. Select: Installation setup -
Edit
5. Select the required TP:
Frequency, Polarity and
Symbol rate.
6. Select the channel.
Red: Add a channel
Green: Rename the channel
7. Set the new PIDs:
a. Press the OK key to set
the Video PID.
b. Press the OK key to set
the Audio PID.
c. Press the OK key to set
the PCR PID.
8. Make sure, the signal
indicator shows a reading.
9. Select Confirm.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Echostar dsb 890 2ci at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Echostar dsb 890 2ci in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info