424459
11
Zoom out
Zoom in
Previous page
1/48
Next page
Getting Started
www.echostar-int.com Page 1 - 1
© 2004 EchoStar International Corporation
All rights reserved
GETTING STARTED
1. UNPACKING
1.1. TO UNPACK YOUR RECEIVER:
When you unpack the contents of the box,
confirm that all the parts are included.
Unpack the contents of the box carefully.
Electronic equipment as receivers are easily
damaged when you handle it roughly. Examine
all parts for damage that may have occurred
during shipment. If you find any damage, stop to
unpack the box and call the shop where you
bought the receiver.
To help avoid possible damage to the receiver’s
electronics, allow the receiver to adapt to the
ambient temperature and humidity level. This to
avoid condensation.
1.2. THE CONTENTS OF THE BOX
The box contains:
A receiver;
An UHF-cable;
A remote control unit (RCU);
A pair of batteries (for the RCU);
A set of documentation.
CAUTION
It is recommended to keep the packaging
materials for a period of time. In case of
warranty claims, we can request to return
the receiver in the original packaging to
protect the electronics. Failing to do so
might void the warranty.
WARNING
KEEP AWAY THE PLASTIC PACKAGING FROM
CHILDREN. THE PLASTIC PACKAGING MAY CLING
TO NOSE AND MOUTH AND PREVENT
BREATHING.
2. INSTALL YOUR RECEIVER
2.1. PROGRAM THE RECEIVER
This section assumes that the dish installation
is completed and operational and your receiver
is connected to your TV and other equipment
with suitable cables.
PRE-PROGRAMMED CHANNEL LIST
1. Switch the receiver to ON and wait for the
Languages menu to appear.
2. When in the Pre-programmed lists, select a
language and the related pre-programmed
channel list.
3. Make sure, the pre-programmed language
settings are convenient for you.
4. Select Continue and press the OK key.
5. Allow the receiver some time to load the
channel list and wait for the live video to
appear.
WARNING
ALL EQUIPMENT INVOLVED IN THE INSTALLATION
TASK MUST BE INSTALLED CORRECTLY AND
SWITCHED OFF. MAKE SURE THAT IT IS SAFE TO
PROCEED WITH THE INSTALLATION TASK.
U
NSAFE CIRCUITS AND INSTALLATIONS CAN
CAUSE (SERIOUS) INJURY OR DAMAGE TO
EQUIPMENT.
NOTE
Your receiver is pre-programmed for a fixed
dish installation with a universal LNBF. If you
have another dish installation (motorized),
additional settings are required.For detailed
information about the pre-programmed
channel lists and installation types, please
refer to the appendix.
QUICK REFERENCE GUIDE
Switch the receiver to ON.
Select your language / channel list.
Wait fo the live video to appear.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Echostar dsb 890 2ci at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Echostar dsb 890 2ci in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info