424404
29
Zoom out
Zoom in
Previous page
1/38
Next page
EchoStar User Interface Operation Section 3
S/W Version 1.0 Page 3 - 7
© 2003 EchoStar International Corporation
All rights reserved
English
3
9. HOW TO RESET THE RECEIVER
10. HOW TO DO A SOFTWARE UPGRADE
NOTE
There are different procedures for a reset of the receiver.
Delete channels - to delete all channels from the channel and favorite lists.
Factory reset - to return to the factory defaults and pre-programmed channel lists.
Full reset - to delete all settings and start with the Guided setup.
Only the procedure for a Full reset followed by the Guided setup is given.
NOTE
This procedure is applicable to standard installations with a single dish and LNB.
Please refer to the Initial setup procedures for DiSEqC1.2 and GoTo X installations.
1. Press the MENU key.
2. Select User data -
Maintenance - Full reset
and press the OK key.
3. Enter your PIN-code.
4. Select Yes.
5. Wait for the Guided setup
menu to appear.
6. Press the red key.
7. In the Language menu,
make the required
selections.
8. Press the OK key.
9. Press the green key.
10. In the User LNB menu,
make the required
selections.
11. Press the OK key to
confirm.
12. Press the MENU key.
13. Press the yellow key.
14. In the Satellite list, make
the required selections.
15. Press the OK key.
16. Press the blue key.
17. In the Dish installation
menu, make the required
selections:
18. Select the satellite option.
19. Press the OK key and
make your selection.
20. Select the transponder
option.
21. Press the OK key and
make your selection.
22. Use the signal indicator to
check the signal strength
and quality.
23. Press the green key to
start Search channels.
WARNING
DO NOT PRESS ANY KEYS DURING THE SESSION, THIS CAN INTERRUPT THE SOFTWARE
UPGRADE SEQUENCE WHICH CAN DAMAGE THE RECEIVER PERMANENTLY.
NOTE
On a regular basis, EchoStar offers software updates via satellite and the EchoStar
web site (where we also announce new software releases and related documentation).
If you have trouble to get a download with the latest software version, please ask your
retail seller or dealer for assistance
1. Press the MENU key.
2. Select User data -
Maintenance - Software
Upgrade and press the
OK key.
3. The default settings are
pre-programmed.
4. Select Start to begin the
Software upgrade.
5. Follow the instructions as
given in the progress
screens.
6. If you want to download
from another satellite,
please visit our web site
for detailed instructions.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Echostar dsb 880 2ci at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Echostar dsb 880 2ci in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info