424404
13
Zoom out
Zoom in
Previous page
1/38
Next page
User Manual
Familiarization
Section 2
S/W Version 1.0 Page 2 - 3
© 2003 EchoStar International Corporation
All rights reserved
English
2
2.1.2. MOTORIZED
D
ISEQC1.2
G
OTO X
2.1.3. SYSTEM SETUP
S
EARCH CHANNELS
NOTE
Some options might not be supported by your DiSEqC1.2 motor. Please refer to the
user guide of the motor for further details.
DiSEqC on To select the DiSEqC1.2 option for motorized installations.
DiSEqC off To select the DiSEqC1.0 option for fixed installations.
Limits on To select the dish movement limits option by software.
Limits off To delete the dish movement limits.
Move dish To move the dish and find the defined SAT.
Fine tune To move the dish for best signal level and quality.
Set East limit To set the East limit by software.
Set West limit To set the West limit by software.
Go to reference
If you want to reset your DiSEqC1.2 motor, you can re-calibrate
the position of the motor with the command: Go to reference.
Allow the motor some time to re-calibrate.
Recalculate position If a DiSEqC1.2 motor is out of position, you can recalculate the
position of all programmed satellites with the command:
Recalculate position. Allow the dish some time to recalculate
the SAT positions.
My latitude To set the latitude for the installation site of the dish.
North/South To select the hemisphere for the installation site of the dish.
My longitude To set the longitude for the installation site of the dish.
East/West To select the hemisphere for the installation site of the dish.
Set East limit To set the East limit by software.
Set West limit To set the West limit by software.
GoTo X To select the GoTo X option for DiSEqC1.2 installations.
SAT To define the satellite you want to search channels on.
LNB To select the LNB that you want to use for the selected SAT.
TP To select a transponder, from the internal database, of the
defined SAT. If the signal indicator shows low levels, select
another TP that gives a better signal.
Position
(DiSEqC1.2 only)
Shows the database number of the satellite.
Search mode To select Auto (all), TP or Network to search for channels.
Channel type To search for All channels, only FTA or only Scrambled
channels.
Channel To search for All channels, only TV, only Radio or only Data
channels.
Move dish
(DiSEqC1.2 only)
To move the dish and find the defined SAT.
Fine tune
(DiSEqC1.2 only)
To move the dish for best signal level and quality.
Search channels Search channels does a channel search on the defined SAT.
Signal level To indicate that you receive a signal (signal strength).
Signal quality To indicate that you have lock onto the selected TP (signal-to-
noise ratio).
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Echostar dsb 880 2ci at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Echostar dsb 880 2ci in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info