424404
7
Zoom out
Zoom in
Previous page
1/38
Next page
EchoStar User Interface
Initial Installation
Section 1
S/W Version 1.0 Page 1 - 1
© 2003 EchoStar International Corporation
All rights reserved
English
1
INIT IAL INST ALLATIO N
1. INTRODUCTION
The satellite receiver is pre-programmed with the FTA channels for ASTRA1 and HOTBIRD
as know during the manufacturing of the receiver. Note that it is possible to update the
channel lists easily, for a detailed instruction, please refer to installation update. The pre-
programmed channels are only for use in a single fixed dish installation with a so called
universal LNB. If your installation is different some extra programming needs to be done. For
a detailed instruction, please refer to the Guided setup.
2. NAVIGATION
The EchoStar User Interface has various ways to navigate through the menus and functions.
Some of the keys on the remote control unit give direct access to functions. Important keys
are identified as EPG, colored keys, MENU, OK and EXIT. Other keys are multi-functional
which means that their function can change with the selections you make.
3. TO INSTALL YOUR RECEIVER FOR THE FIRST TIME
This section assumes that the dish installation is completed and operational and your
receiver is connected to your TV and other equipment with suitable cables. Note that your
receiver is pre-programmed for a fixed dish installation with a universal LNBF. If you have
another dish installation (multiple LNBs or motorized), additional settings are required.
NOTE
Unless otherwise specified; this note explains the navigation through the menus and
functions.
In the main, user and EPG menu:
1. the MENU key lets you access to the main menu or go back one menu level;
2. the EXIT key lets you leave a menu or selection and return directly to live;
3. the keys let you scroll up and down through the selectable items;
4. the keys let you scroll left and right through the selectable items;
5. The OK key lets you:
- confirm and execute a selection;
- open a pull-down menu.
In a pull-down menu:
1. the OK key lets you confirm the selection;
2. the highlighted cursor indicates the active selection.
NOTE
For receivers that are connected with an UHF cable, make sure that the TV is set to
UHF channel 38 (607.25Mhz). If the channel number on the TV and receiver are not
the same, you will have a distorted or no image at all.
For more information, please refer to the user manual of the TV.
NOTE
For receivers that are connected with a SVHS cable, make sure that the audio to the
TV is connected with either the S/PDIF or the AUDIO L/R connector.
For more information, please refer to the user manual of the TV/VCR.
NOTE
From the next step onwards, the procedure is divided in different installation
procedures. The given procedures are; Fixed, Multiple LNBs, DiSEqC1.2 and GoTo X.
Fixed means install a single dish with an Universal LNB;
Multiple LNBs means install a dish with multiple LNBs or multiple dishes;
DiSEqC1.2 means install a moveable dish according the DiSEqC1.2 spec;
GoTo X means install a moveable dish that is GoTo X compatible.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Echostar dsb 880 2ci at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Echostar dsb 880 2ci in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info