424696
47
Zoom out
Zoom in
Previous page
1/66
Next page
Maintenance
Section 6
Digital Satellite Receiver Page 6 - 1
© 2001 EchoStar International Corporation
All rights reserved
6
MAINTENANCE
1. HARDWARE MAINTENANCE
1. Switch the receiver to off and make sure the display shows black.
2. Remove the mains plug from the power supply socket.
3. Wait at least five seconds, to help avoid possible damage to the receivers electronics.
4. Use a dry, soft and clean lint-free cleaning cloth to clean the receiver.
5. Other cleaning agents can cause damage to the outside surface.
a. Make a dry, soft and clean lint-free cleaning cloth a little damp.
b. Carefully wipe the surface and make sure that no moisture gets into the receiver.
c. Let the receiver dry on the air.
6. Install the receiver and make sure all connections on the rear panel are made correctly
(For more detailed instructions, please refer to section Installation).
7. Connect the mains plug to the power supply socket.
8. Set the local time, for detailed instructions please refer to the section Operation.
2. SOFTWARE MAINTENANCE
2.1. TO CHANGE THE SETUP OF THE RECEIVER
WARNING
RISK OF ELECTRICAL SHOCK.
R
EMOVE THE MAINS PLUG FROM THE POWER SUPPLY SOCKET BEFORE YOU CLEAN THE
RECEIVER
.MAKE SURE, IF USED, CLEANING AGENTS CANNOT GET IN THE RECEIVER.
NOTE
Make sure the local time is set correctly otherwise you cannot view and use the
EPG information because the EPG and the related timers need the correct time.
NOTE
Unless otherwise specified; This note explains the way you can navigate through
the maintenance pages of the EchoNAV setup menu.
1. Use the OK key to pull down the menu selection fields.
2. Use thearrow keys to go through the selectable menu items.
3. In a pull-down menu, use the OK key to confirm the selection.
4. Use thearrow keys to navigate between the left and right column of
selectable menu items.
5. Use the EXIT key to leave the menu and return to the live mode.
1. On the RCU, press:
a. the MENU key;
b. the key to select the menu;
c. the OK key, to select the or menu.
2. Press the OK key and make the selections, note
that you cannot change the System field.
3. Read the available help text for information.
4. Go to the Check Signal field.
5. On the RCU, press the OK key.
Downloaded from www.Manualslib.com manuals search engine
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Echostar dsb 707 via at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Echostar dsb 707 via in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Echostar dsb 707 via

Echostar dsb 707 via User Manual - German - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info