424381

Echostar ad 3000 Manual

3
Zoom out
Zoom in
Previous page
1/23
Next page
3
1 INSTALLING THE BATTERIES
Your Tri Control needs 2 new "AA/LR06" alkaline batteries.
1. Remove the battery cover from the back of your Tri Control by pressing down on the tab.
2. Match the batteries to the (+) and (-) marks inside the battery case, then insert the
batteries.
3. Press the battery cover back into place.
Important note:
In order to avoid having to reprogram your Tri Control after you remove the batteries, you will
need to insert new batteries within 15 minutes. Also it is best that you do not use rechargeable
batteries.
2 THE KEYPAD
Power Key
The Power key turns on and off your EchoStar Receiver and controls the same function as it did
on your TV and Video original remote control.
LED
The LED (Light Emitting Diode) flashes red to show the remote is working.
Device Keys
The TV, VCR and SAT keys select the device to be controlled. For example pressing the SAT
key allows the remote to control the functions of your EchoStar Satellite Receiver, after pressing
TV, you can operate your Television and the VCR key operates your Video Recorder. These keys
are also used to set Up your different devices.
Volume, Channel Keys
The Volume and Channel keys control the two most frequently used functions of your Television
and Satellite Receiver. They operate just as those on your original TV remote.
Mute Key
The Mute key operates the same function it does on your original TV remote control
Number/Input Keys
The Number/Input keys (0-9, TV/RAD, FAV) provide functions just like your original remote,
such as direct access programme selection. If your original remote uses one/two digit input
switching (-/--, 10 or 20 symbol), this function can be obtained by pressing the -/-- key, this is the
same as the FAV key. If your original remote has an AV key, this function can also be found
under the TV/RAD key.
BACK UP Key
Will operate on your TV as previous programme or channel (P < P).
Downloaded from www.Manualslib.com manuals search engine
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Echostar ad 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Echostar ad 3000 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info