818967
170
Zoom out
Zoom in
Previous page
1/205
Next page
Chapter 11 Service and Maintenance
5. Lift the body off.
6. Clean away the mud and the grass using the brush and/or a spatula such as the ones
shown below. If compressed air is available this is more effective.
When the service is complete:
1. Replace body onto the chassis.
2. Tighten the 4 bolts to a torque of 7Nm.
3. Re-connect the cables.
Inspect the bumper
1. Check that the bumper material is intact; no cuts or tears. If so replace it (page 189).
2. Clean the bumper with a damp cloth.
Note: Do NOT use water.
Inspect and clean the sonar sensors
The sonar sensors need to be kept clean if they are to operate properly. All need to work
properly otherwise an alarm is issued.
1. Remove any mud, grass or dirt and wipe with a cloth.
Note: Do NOT use water.
170 Turfmow 1000 Technician's Manual Version: Release 3.5 Last updated: 2018-12-20
170


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Echo Turfmow 1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Echo Turfmow 1000 in the language / languages: English as an attachment in your email.

The manual is 26.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info