818967
32
Zoom out
Zoom in
Previous page
1/205
Next page
Chapter 6 How Turfmow 1000 works
The robot leaves the station and follows the wire (trackwire movement (page 202)) until it
reaches point A. At point A it executes the loopstep (page 200) move, turning through 90o
and moving into the trackborder (page 201). At point B the robot turns again and follows the
track border until it reaches point C. The robot then turns through a random angle and moves
into the field to start mowing.
The parameters specifying how the robot leaves the station are defined in the Access
parameters (page 200) and the StartZone (page 200) parameters for the station.
6.1.6.2 Multiple mowing fields with positioning beacon
In this configuration there are multiple wires, each defining a parcel (area to be mowed).
Before leaving the station the robot must decide in which parcel to start mowing. This will
depend on:
The defined mowing schedule for each parcel.
If the schedule dictates that a specific parcel must be mowed at this time, the robot will
start mowing in that parcel.
The percentage values assigned to each parcel.
If there are no schedule constraints, the robot will choose the parcel based on the
percentage values. Over a period of time the robot ensures that it starts in each parcel
according to the defined proportions.
The figure below illustrates the example of when the robot starts mowing in "Parcel R".
32 Turfmow 1000 Technician's Manual Version: Release 3.5 Last updated: 2018-12-20
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Echo Turfmow 1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Echo Turfmow 1000 in the language / languages: English as an attachment in your email.

The manual is 26.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info