Support: Support.Eccotemp.com Shop Online: Eccotemp.com Store Locator: Eccotemp.com/locator
PLEASE NOTE: MINI TANKS ARE FOR INDOOR PERMANENT INSTALLATIONS ONLY. BEFORE POWERING THE WATER HEATER, BE SURE THAT THE SYSTEM IS COMPLETELY FILLED WITH WATER
AND ALL AIR IS REMOVED.THIS MANUAL AND ALL ECCOTEMP CONTENT IS SUBJECT TO CHANGE WITHOUT NOTICE. PLEASE VISIT SUPPORT.ECCOTEMP.COM FOR MORE INFORMATION.
TROUBLESHOOT
BEFORE YOU CALL FOR SERVICE
Troubleshooting
Save time and money! Review the troubleshooting tips below rst and you may not
need to call for service.
1. Water does not get hot:
• Make sure the power supply is on and working.
• If the light does not come on, check to see if the reset button has been
toggled into the reset position. The reset button can be found on the
back of your Mini Tank towards the bottom.
• If the power button is illuminated, but water temperature does not get hot
at the sink, test for a plumbing crossover by shutting o the cold water supply
to the water heater and opening the hot water tap (there should be no water
owing). Any continuous ow indicates a cross over which will eect the
temperature and will need to be corrected.
• If you are unable to determine a plumbing crossover by this method,
replacing the heating element may be needed.
2. Power Button not on:
• If the power indicator button light does not come on but the water gets hot,
check for faulty power indicator button bulb.
• Check reset button.
3. Brown Water:
Brown or rusty water indicates a spent anode rod. Replace anode rod.
4. Odor in Water:
Smelly water could be due to an unusual reaction between local water and
the heater’s anode rod. Check anode rod.
5. Water is too hot:
Turn the temperature knob to a lower temperature setting, or use the app
to set the temperature to a lower setting. If the water temperature does not
lower within 60 minutes, then the thermostat may need to be replaced.
6. Water is not hot enough:
See “Adjusting your Thermostat:” on page 16.
7. Water is leaking:
• Unplug water heater from 110/120v outlet.
• Check and tighten any loose water ttings and/or T&P tting on the top of
the tank as needed.
• Remove cover and inspect heating element gasket to see if it is loose or for
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Eccotemp ESH 4.0 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Eccotemp ESH 4.0 in the language / languages: English as an attachment in your email.
The manual is 2.85 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
