782663
14
Zoom out
Zoom in
Previous page
1/20
Next page
14 Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator 15
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator
Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483 Phone: 866-356-1992 | Email: Support@eccotemp.com Address: 315 - A Industrial RD Summerville, SC 29483
DESCALING THE HEATING ELEMENT:
Scale deposits can affect the heating capability of the element. Heavy scale can
even cause the element to burn out. The element can be descaled chemically or
manually.
1. Remove the heating element (see above).
2. To descale chemically, soak the heating element in white vinegar or other
descaling solution and then rinse well with fresh water.
3. To descale manually, let element dry and then using a non metallic brush similar
to a tooth brush; brush the residue from the element. Avoid damaging the surface
of the element.
4. Reinstall the element and gasket.
5. Rell tank with water before turning on the power to the water heater.
REPLACING THE HEATING ELEMENT:
1. Unplug and drain the water heater (see prior instructions).
2. Remove heating element noting original positions of all connections.
3. Install new element with gasket making sure the new element and gasket are
positioned correctly.
4. Tighten retaining nuts and make the wire connections to their original locations.
REPLACING THE ANODE ROD:
The anode rod helps protect the tank against corrosion. Depending on the water
condition, the magnesium anode rod may need to be changed every year or so.
Galvanic and electrolytic corrosion can destroy a tank if the anode rod is “spent”
Rusty water is usually an indication of a “spent” anode rod. If rusty water is
present, examine anode rod immediately. Rapid degradation of the anode rod (less
than 1year) may indicate the presence of galvanic corrosion due to “stray” direct
current. In this case, it may be necessary to add a “grounding strap” from the tank
to the copper plumbing.
1. Turn off the power supply and drain the heater
2. Remove heating element
3. Remove and replace the anode rod
4. Rell tank with water before restoring power.
CHANGING THE THERMOSTAT:
1. Unplug the water heater from the electrical outlet.
2. Drain and remove the water heater. (see page 12)
3. Remove the front panel of the water heater and loosen the two brass screws to
pull wires out.
4.Remove thermostat knob and unscrew two retaining screws.
5. Remove the thermostat probe from the well.
6. Install new thermostat, attach wires and tighten screws.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eccotemp EM 7.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eccotemp EM 7.0 in the language / languages: English as an attachment in your email.

The manual is 3.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info