611741
12
Zoom out
Zoom in
Previous page
1/98
Next page
30-1-2015 12 ebode VLHD38
USB Optional: Connect a compatible USB mouse, keyboard, gamepad to the receiver
through USB interface and make sure they are perfectly connected. HINT: if the USB
device is not working, disconnect the USB device and establish a video connection first.
After the video connection is successful established, re-connect the USB cables.
4.6 Pair devices:
The VLHD38 should automatically connect when:
Both the VLHD38 Transmitter`s Power Buttons are ON
The source is connected, powered and playing / showing image
The TV on both Transmitter and Receiver side are Powered, ON and set to the right
input channel for HDMI (depends on where the VLHD38 is connected)
All cables are connected properly
30 seconds have been passed (the VLHD38 needs to boot)
If USB Power has been used; has enough output power (minimum 1.5A)
If the VLHD38 connection fails:
Press the PAIR button on the VLHD38 Transmitter
Press the PAIR button on the VLHD38 Receiver
After pairing, the connection is re-established and the system is ready to transport AV
signal. The Receiver TV will show its status (connecting, searching etc.)
In case you have no signal we suggest you to check chapter 5 (Frequently asked
questions) and to find out what has gone wrong.
5. Frequently Asked Questions
Before following the frequently asked questions below, make sure that your receiver and
attached equipment (HD source and display) are all properly connected, switched on and
not in Standby Mode, please give them a 10 second power off reset before taking the
next steps:
No video
1. Are the VLHD38 Power Buttons on both the Transmitter and
Receiver ON?
2. Ensure there is video on the output device (Source).
3. Check the receiver is correctly connected to display
equipment.
4. Make sure all devices are working on supported distance. Draw
them closer and try it again.
5. Is the VLHD38 USB Power Cables are used, make sure there is
enough output power on the USB Power Port (1.5A Minimum).
Power
LED off
1. Make sure the Power Adaptor or Power USB cable is correctly
connected and the voltage is 5V 1.5A or higher.
2. Make sure the power supply would not be interrupted.
Receiver
video
indicating
LED
abnormal
1. Make sure video and audio signals can be transmitted to receiver
successfully.
2. If there are video and audio signal on output devices, please
check the indicating LED to see if something got wrong with it.
3. Make sure the device is working within the supported distance.
Bad
picture
1. Ensure there is video on output devices.
2. Check if the receiver is correctly connected to display equipment
and there is no damage on joints and wires.
3. Make sure all devices are working on supported distance. Draw
them closer and try it again.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebode VLHD38 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebode VLHD38 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info