Manual Ebode RPA (page 6 of 24) (English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian)

611861

Zoom out

Zoom in

1/24

Receiver - Plug-In Appliance Module Ref : RPA

July 2009 page 6 RPA

1. Plug the appliance or

lamp into the module.

2. Plug the module

into a socket.

Installing the appliance module

NOTE: Make sure the appliance or light is powered on.

X10 address

The X10 address consists of a House Code and a Unit Code.

In order for this module to respond to a command sent via the

Power line, the module needs to be initialized.

It is possible to congure multiple addresses for this module.

General information:

- The RPA appliance module can be congured to respond to up to 8 X10

addresses.

- The led will blink Red when ON/OFF commands are received.

1. Use a small sharp object, e.g. a paper clip, to shortly press the

setup button. This button is situated in the small opening between

the two LEDs. When the button is pressed, the green led will blink

quickly, waiting for a command.

2. Send the ‘power on’ command for the desired address.

3. The led will stop blinking.

4. The appliance module address is now stored.

5. If you wish to congure additional addresses repeat this procedure

form from step 1.

Programming the RPA:

If you want to control the RPA via a RF remote like e.g. the ebode TPC, EM

or IMRF, you need to install a RF transceiver (e.g. RPT, CM15, TM13 or SC28

security console).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ebode RPA in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ebode RPA Manual

Product: