611854

Ebode PMML Manual

8
Zoom out
Zoom in
Previous page
1/40
Next page
Transmitter & Receiver - Remote Controlled Appliance Kit Ref : PMML
July 2009 page 8 PMML
UPGRADING AND PROGRAMMING
If you wish to add other Micro Transmitters, Micro Receivers or re-
mote control switches to the existing installation, you may choose
among the following solutions:
-Add one or many command points to create a two-way switch: Install the
Micro Transmitter(s) as specied in its manual
-Add a remote control switch: The rst line of buttons automatically controls the
lighting. (See remote control switch manual).
-Add an additional lighting spot: Install the Micro Receiver as specied in its
manual.
REMARKS
Within a single installation, no additional programming is necessary to add one
or more Micro Module(s) and remote control switch(es) to this pack.
-Installing an additional pack for another lighting point: In order to separate the
two installations, follow these instructions.
3.1 HOW TO PROGRAM THE MICRO TRANSMITTER
In order to add the Micro Transmitter to a different installation from the original
one, or to one with interference from a nearby system, it is necessary to pro-
gram a different code.
The programming address is made up of a ”HOUSE” code (from A through P)
and of a “UNIT” code (from 1 through 16). The factory default address of the
transmitter/receiver pair is set at A1. Proceed as follows to set a different code.
A. Accessing programming mode.
- Press the Micro Transmitter’s START (1) and STOP (0) buttons briey and
simultaneously. The LED turns YELLOW.
Then the LED lights up RED once (for the HOUSE CODE), then GREEN once (for
the UNIT code). The Micro Transmitter is in the A-1 setting.
You have 6 seconds to program a new code.
B. Setting the HOUSE CODE.
- Press the (1) button as many times as needed to get to the desired HOUSE
CODE and then release it.
Example: A = press once, B = press twice, C = press three times, ... P = press
16 times.
- After having set the HOUSE CODE, the LED will ash YELLOW 3 times to
conrm the code has been memorized and exit from programming mode.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebode PMML at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebode PMML in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info