611763
35
Zoom out
Zoom in
Previous page
1/44
Next page
7-4-2011 Rev2 35 IR Link Pro Flush
1. Faça a conexão dos Emissores 3IREDB na janela do Sensor IR, dos componentes do sistema
que pretende controlar. Consultar as Fig. 2.
2a. Ligue a mini ficha amarela do 3IRED8 numa das tomadas amarelas
dos "EMISSORES" do Bloco de Ligações IRHUB4.
2b. Ligue o cabo IRQC numa das tomadas etiquetadas a amarelo dos
"EMISSORES" do IRHUB4, e o outro extremo na entrada mono IR 3.5mm do
seu AVR. Configuração do pino IRED Mono TS 3.5mm: ponta é IR Data,
acoplamento é Ground (Terra). (POR FAVOR VERIFIQUE O MANUAL DO
DISPOSITIVO PARA CONFIGURAÇÃO CORRECTA DO PINO)
3. Faça um buraco com diâmetro de 12 mm no local onde pretende posicionar o receptor IR.
Remova a porca de fixação. Empurre o cabo e rosca do receptor através do orifício com a
lente orientada para a divisão (e em linha de vista com o seu comando sem fios ). Aperte a
porca de fixação de forma fixar o receptor no sitio.
4. Ligue a mini ficha vermelha do IR Receptor IRLPRO Flush no jack vermelho "1R RCVR" no Bloco
de Ligações IRHUB4.
5. Ligue a cabo de alimentação 12VDC numa tomada não comutada de 230V~50Hz.
NOTA: É importante que use uma tomada AC não comutada de modo que o sistema IR esteja
sempre activo para os comandos de alimentação do sistema ON(Ligados).
6. Ligue a ficha 2.1mm "C" no Adaptador do Alimentador numa tomada "12VDC" no Bloco de
Ligações IRHUB4.
ESTADO
Pode enviar o sinal de Estado da Alimentação ao Receptor IRLPRO IR ligando o adaptador do
Alimentador a esta ligação (não fornecida: 5 – 24 VDC & 5 – 12VAC) a qual por ex. é comutada
pelo dispositivo a ser controlado. Quando o dispositivo A/V é ligado, o LED de Estado Âmbar
acenderá no IR receptor IRLPRO Flush de modo que pode visualizar se o dispositivo A/V está
ligado. (ver figura 3). O limite de tensão de entrada é
5 – 24 VDC & 5 – 12VAC. Configuração do
pino da tomada 2.1mm: Centro/vermelho é +VDC, comutador/preto é Ground (Terra).
Na parte superior do armário existe uma abertura para colocar o interruptor. A posição
predefinida do interruptor é a posição de “parking” JP1. Há 3 posições diferentes de resposta
LED de Estado:
Fi
g
2
Fi
g
3
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebode IR Link Pro Flush at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IR Link Pro Flush in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info