Manual Ebode IR Link M (page 5 of 28) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

611759

Zoom out

Zoom in

1/28

Version 1.0 - 8-1-2013 5 ebode IR Link M

your components.

Note: The IR Emitters have self-adhesive tape on the back. Use this to stick them onto the

IR eye of your equipment. This should be done very carefully and precisely. Test the

position of the IR Emitters first, before you finally stick them onto the eye.

Connect additional IRED Emitters to the corresponding jack of the Hub, and install the

small Emitters onto your controlled components as per the procedure above.

Tech Tip: By using a flashlight to shine on the display of your Audio/Video device, you can

easily see where to place the emitters.

Step 3: Run the wire of the IR Receiver through the back of your cabinet and plug the

jack into the correct socket of the Hub.

Step 4: Plug the power supply adapter into the little Hub power connection.

ATTENTION: If you are only using one appliance, then you do not need to use the

additional IR Emitters. Never remove it from the wire! Just dress up the wire and leave

close to the Hub.

TIP2: If you want to control more appliances, you can purchase an extra IR Emitters (IRED

series) and plug this into the other connection.

7. Operation

Point your original remote control at the IRLM Receiver. As soon as you press a button, the

Receiver captures the IR command, converts it into a low voltage signal, and transmits it

to the ebode IRHUB1. This unit converts the signal into an IR message back, in order to

control the selected A/V source.

8. How to avoid and solve possible problems

Although the ebode IR Link M is equipped with proprietary eIR

(pronounced Irex)

Technology, which guarantees a high level of immunity of InfraRed noise from direct

sunlight, CFL lighting and Flat Panel TV’s (including Plasma, LCD and LED), in rare cases, the

IRLM IR Receiver may have to be moved to a different location if the unit is picking up

unexpected interference. This interference may, in severe cases, prevent the system from

working. You can identify interference when the InfraRed Emitters are lit or blinking, even

when you’re not using a remote control transmitting at the time.

After repositioning, check to see if the ebode IR Link M operates the satellite Receiver or

other components. If the ebode IR Link M still does not work, reposition the IRED Emitter(s).

It may not be located directly over the component’s InfraRed receiving "window".

Consult the owner's manual of the unit or the manufacturer for the exact location of the

InfraRed "window". If the ebode IR Link M does not work at all, please check all the

connections.

Do you still have questions? Please refer to www.ebodeelectronics.eu

9. Technical information

Power Supply: 230V~50Hz, 12VDC 100mA; 2.1mm

IR emitting diode cable: 2 IR LEDs

Cable length: 3 m total, 1 m from HUB to IR LEDs, and/or 3.5 mm mono jack plug

Receiver dimensions: 35x10x10mm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IR Link M in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ebode IR Link M Manual

Product: