611750

Ebode IR Link B Manual

4
Zoom out
Zoom in
Previous page
1/28
Next page
10-8-2010 4 ebode IR LINK B
2. Introduction
Congratulations on purchasing the ebode IR Link B. Our ebode proprietary eIR
2
x
TM
(pronounce Irex) Technology guarantees a high level of immunity for InfraRed noise of
direct sunlight, CFL lighting and Flat Panel TV’s (including Plasma, LCD and LED). It
provides accurate reproduction of the latest generation InfraRed codes that are used in
remote controls of, for instance, Set-Top Boxes and Media Players (incl. RC5/6, RCMM,
XMP, SKY HD).
The ebode IR Link B is an InfraRed Extender System that allows full InfraRed remote control
operation of A/V components located behind closed cabinet doors or other concealed
and/or out-of-sight locations.
An InfraRed Extender in general consists of an IR (InfraRed) capture device, the receiver,
a distribution circuit/connecting block, the Hub, and finally the IR LED output, the Emitter,
which flashes the IR signal to the A/V component.
3. Set contents
The ebode IR Link B consists of 2 parts
-1 IRLB Mouse IR Receiver
-1 IRHUBB with battery clip and 3 InfraRed Emitters (model IREDB) attached
- 3 replacement adhesives for the IR Emitters
The ebode IR Link B system has a (EN22/PP3) 9VDC battery connector (battery not
included). The IR Emitters have a self adhesive film on one surface of each emitter. This
allows them to be “stuck” to the IR sensor “window” on your source equipment. The cord
to the Emitters is permanently attached to the distribution circuit of the IR Link B Hub.
4. How does the ebode IR Link B work?
The ebode IR Link B Receiver, placed on a shelf or cabinet, receives IR signals from your
remote controls. It then amplifies the remote control signal and passes it to the attached
Emitters. The small Emitters each contain an IR transmitting LED and blink visibly when
remote commands are passed. They allow control of IR remote controlled audio/video
components (such as your A/V Receiver, DVR, Satellite Box, Cable Tuner, etc.) and are
attached to the IR sensor “window” on such components by a self adhesive film. When a
handheld remote control is operated and aimed at the ebode IR Link B, the IR
commands will be passed to the controlled equipment.
5. Are there circumstances where the ebode IR Link B will not work?
Most brands and models of IR controlled equipment can be operated with your ebode IR
Link B, with some exceptions like those using high frequency IR carriers, such as
Bang&Olufsen (ask your dealer).
6. Installing the ebode IR Link B
Step 1: Place the ebode IR Link B Receiver in any convenient location so that the InfraRed
beam from your remote control has a direct view to the front of the unit (within range of
the device (4 - 8 meters)). The IRLB Receiver can be fixed to the surface by using the
double side tape pad or via a slide on screw hole on the bottom of the unit.
Step 2: Run the wire of the IR Receiver through the back of your cabinet and put the plug
into the socket of the Hub.
Step 3: Install the small Emitters onto your controlled components, using the following
procedure:
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebode IR Link B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IR Link B in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info