611776

Ebode IPV68 Manual

67
Zoom out
Zoom in
Previous page
1/76
Next page
March 2013 IPV68
67
5.0 Appendix
5.1 Frequently Asked Questions
Note: For most problems you might encounter, please check Network connections first.
Check the working status revealed by the indicators on the network server, hub, exchange and network
card. If abnormal, check the network connections.
I have forgotten the administrator username and/or password.
To reset the administrator username and password, press and hold down the RESET BUTTON for 15
seconds. Release the power button and the username and password will be reset back to the factory
default administrator username and password.
Default administrator username: admin
Default administrator password: None, i.e., no password
Subnet doesn’t match, double click to change
If IP Camera Tool shows error information “Subnet doesn’t match, double click to change!” Please
choose Obtain IP from DHCP server. (Figure 2.2). If it still shows this error after obtaining IP from
DHCP server, please check local area connection of your computer, change subnet, gateway of the
camera. Keep them in the same subnet as your computer. (Figure 2.3).
IP Address configuration
Check whether IP address of the IP camera server shares the same subnet as your computer: Click My
Computer >Control Panel> Network & Dial-up Connections > LAN > Attributes >Internet
Protocols (TCP/IP), and check IP Address and Subnet Mask. Make sure they are in the same
subnet when configuring the camera’s IP address manually.
Can’t access IP camera via the Internet
Some typical reasons:
1. ActiveX controller is not installed correctly (see more details: Figure 2.9 - Figure 3.1).
2. The port that the camera is using is blocked by your Firewall or Anti-virus software. Please change
to another port number and try again. (Figure 3.2).
3. Port forwarding is not successful (for more details see Figure 7.4 - Figure 7.9).
Double check these settings and make sure they are correct.
IP Camera Tool could not find camera’s IP
Make sure the camera is connected to its power supply and the power supply is plugged in.
Check if the network cable is not loose.
Make sure DHCP is enabled in your router, don’t enable MAC address filter.
Make sure that firewall or anti-virus software does not block the camera. You can add the camera as a
trusted site in your firewall or anti-virus software.
UPnP always fails
UPnP only contains port forwarding in our recent software. Sometimes, it might fail to do port forwarding
automatically because of firewall or anti-virus software. It also relates to your router’s security settings.
So we recommend you do port forwarding manually. You can view your camera via the Internet
successfully after you do port forwarding manually in your router.
Couldn’t find the shortcut on desktop after install IP camera tool
… 67 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebode IPV68 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IPV68 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info