Manual Ebode IPV68 (page 7 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

611776

Zoom out

Zoom in

1/76

March 2013 IPV68

1.5 Hardware Installation

You need to set up your camera using a network cable (wired) first, before you can use it wirelessly, so

let’s start with plugging in the network cable. Follow the steps below to set up your camera hardware.

1. Plug one end of the network cable into the camera, and the other end into an empty port of your

router/switch/modem.

2. Install the Wi-Fi antenna.

3. Plug the power adaptor into the camera and into an AC outlet.

4. It takes approximately 30 seconds to boot up the camera.

5. When the power is on and the network cable is connected, the green LED on the rear panel next to the

network cable will stay on, please make sure the Green light is on before we continue.

The yellow LED will keep flashing, and the Indicator LED on the front of the camera will flash when the

connection is established. (The behavior of the front indicator LED can be controlled by software).

Figure 1.4

1.6 Software Installation

1. IP Camera Tool: Insert the CD, a popup menu might appear like shown in the picture below.

2. Select “Open Map” and click “OK”

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IPV68 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ebode IPV68 Manual

Product: