611769
43
Zoom out
Zoom in
Previous page
1/76
Next page
31-7-2014 43 ebode IPV58P2P
Step 2: Enter the username and password of the Administrator (default username is
admin with a blank password), and click “OK” to apply changes.
Step 3: Wait around 10 seconds, you’ll see that the camera’s LAN IP address has
changed. In our example it was changed to 2000, so we see http://192.168.8.102:2000
in IP Camera Tool. Also, the LAN IP address is now fixed at a static IP address of
http://192.168.8.102:2000. This IP address will not change even if the camera is
powered off and back on, the camera will remain on this LAN IP address. This is very
important that a static LAN IP address is set, or you may have problems later with
remote access and seeing the camera remotely if the camera loses power and reconnects
on a different LAN IP address. Make sure you set a static LAN IP address!
Figure 6.36
If the camera cannot be accessed, please make sure the port forwarding is succeed.
HTTPS port: The default port is 443. You can use the URL to access the camera: https://
IP + HTTPS port.
ONVIF port: By default, the ONVIF port is set to 888. Also, they can be assigned with
another port number between 1 and 65535(except 0 and 65534). But make sure they
cannot be conflict with other existing ports.
RTSP function: RTSP URL rtsp:// [user name][:password]@IP:HTTP port number /
videosream. The part in the square brackets may be omitted.
user name & password: The user name and password to access the camera. This part
can be omitted.
IP: WAN or LAN IP address.
Videostream: Here support three mode: videoMain, videoSub and audio. When the
network speed is bad, here you had better select videoSub. If you select audio, you can
only hear the sound but cannot see the video.
For example:
IP: 192.168.1.11
HTTP Port number: 88
User name: admin
Password: 123
Here I can enter one of the following URLs in the VLC.
Figure 4.1 rtsp://admin:123@192.168.1.11:88/videoMain
Figure 4.2 rtsp:// @192.168.1.11:88/videoMain
Figure 4.3 rtsp://:123@192.168.1.11:88/videoMain
Figure 4.4 rtsp://admin@192.168.1.11:88/videoMain
Open the VLC, and go to Media. Open Network Stream option and enter URL into VLC.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebode IPV58P2P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IPV58P2P in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info