611769

Ebode IPV58P2P Manual

10
Zoom out
Zoom in
Previous page
1/76
Next page
31-7-2014 10 ebode IPV58P2P
Step 2: Wait around 10 seconds, you’ll see that the camera’s LAN IP address has
changed. In our example it was changed to 2000, so we see http://192.168.8.102:2000
in IP Camera Tool. Also, the LAN IP address is now fixed at a static IP address of
http://192.168.8.102:2000. This IP address will not change even if the camera is
powered off and back on, the camera will remain on this LAN IP address. This is very
important that a static LAN IP address is set, or you may have problems later with
remote access and seeing the camera remotely if the camera loses power and reconnects
on a different LAN IP address. Make sure you set a static LAN IP address!
4.2.2 Dynamic IP Addresses
DDNS is a service that allows your IP Camera, especially when assigned with a dynamic
IP address, to have a fixed host and domain name. This means that even though your
WAN IP address is constantly changing, you will have a fixed hostname you can use to
access your cameras at all times. You can access the camera directly from the Internet
using the hostname and port number.
What is the HTTP Port no.?
1) Default HTTP Port is 88
All cameras have the default HTTP port of 88. For example, if the LAN IP link of the
camera is http://192.168.8.102:88, this means that the camera’s HTTP port is 88. You
can change port 88 to another port if you’d like such as 2000 or 8090, which will not be
conflict with other existing ports like 25, 21,10000.Here you can set the port no. between
1 and 65535.
2)Change the default http no.88 to another one.
How to assign a different HTTP Port No. and fixed the LAN IP of the camera by the IP
Camera Tool？
Step 1: Open the IP Camera Tool, select the camera you would like to change the port
of, right click on the IP address, and click on ”Network Configuration”, this brings up the
network configuration box as shown in Figure 2.8 and 2.9.
Figure 4.5
Select which
camera you’d like
to change the port
for and right click
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebode IPV58P2P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebode IPV58P2P in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info