Manual Ebode eSD18 (page 5 of 36) (English, German, Dutch, French, Spanish, Norwegian)

611875

Zoom out

Zoom in

1/36

7-5-2013 5 ebode eSD18

Figure 1.2

6. Registering with the SC28 Home Protector

1. Set the detector to the correct mode, being Remote or Sensor.

2. Access the menu of the console, done by either using the menu UP or DOWN button.

The display now shows ENTER PIN.

3. Enter your PIN; factory default is [0000]: The display is cleared and shows a * for each

number entered.

4. When the PIN code has been entered correctly, the word INSTALL will show up on the

display.

5. Press OK.

6. Press the TEST button on the Detector. The console will beep to confirm. The display will

either read ZONE 1 SET (when sensor mode was set) or RMOT 1 SET (when remote mode

was set).

A memory space for a sensor is called a zone. If you have more than 1 sensor installed,

they will be shown e.g. ZONE 2 SET, ZONE 3 SET, … ZONE 30 SET. You can choose in which

zone you want to install the sensor. If you want to install the sensor in zone 3, press 3 on

the number pad before executing step 5.

It’s advisable to write down which zone contains which sensor for your reference.

7. Repeat step 5 for every Detector you wish to register.

8. Press CLEAR to go back to the first menu item. Press CLEAR again to quit the menu. To

confirm this choice, press 1 for Yes or 2 for No. If you choose Yes, you will quit the menu. If

you choose No, you go back to the first menu item.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ebode eSD18 in the language / languages: English, German, Dutch, French, Spanish, Norwegian as an attachment in your email.

The manual is 0,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ebode eSD18 Manual

Product: