Manual Ebode EM (page 7 of 32) (English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian)

611857

Zoom out

Zoom in

1/32

Transmitter - Wall-Mounted Remote Control Ref : EM

July 2009 page 7 EM

Mounting the EM switch to the wall

Operating the EM module

Check the address.

Simultaneously press the On and Off button shortly to check the

address.

Short press on the ON button, receivers with the same address will power on or

open (when used with shutter).

Short press on the OFF button, receivers with the same address will power off or

close (when used with shutter).

When changing the battery, the address will be retained.

e.g.: for B3 the red led will blink 2 times for the house code and the green led will

blink 3 times for the unit code. Wait until the yellow led blinks 3 times to indicate

the module has left the program mode.

1. Use a screwdriver to remove the mounting plate

from the switch cover. Be careful not to damage the

electronic circuit.

2. Attach the mounting plate to the wall using e.g.

double sided tape or 2 screws (2 mm) etc.

3. Reattach the cover to the mounting plate. Make

sure the ebode logo is on the right bottom.

C. Conguring the Unit Code

Press and release the ON key the appropriate number of times for

the Unit Code you want to set. Once for 1, twice for 2 etc.

The factory setting will be “1 = 1 Green Blink”

After setting the UNIT Code, the yellow LED blink 3 times, which

means the Unit Code is set and the module has leave the program

mode.

Stop

After setting the House Code, the Yellow LED will blink 3 times,

which means the House Code is set and the module has left the

program mode.

To now set the Unit Code, start from step A but skip step B and

go directly to step C.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ebode EM in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 0,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ebode EM Manual

Product: