611721
5
Zoom out
Zoom in
Previous page
1/32
Next page
15-5-2012 5 ebode BTR30
How to turn the BT Sound on/off
Turn on: Press the On/Off button until you hear the beep and the blue indicator light
flashes.
Turn off: Press the On/Off button for 4 seconds, until you hear 3 beeps and the blue
indicator light flashes twice. Please disregard the long beep you’ll hear after 2 seconds, this
is for redialling. Read more about this on the next page.
Connect to your amplifier, stereo or car audio system
Plug one end of the audio cable in your BT Sound and the other end in the source input of
your amplifier, stereo or car audio system.
There is a convertor (Stereo to RCA Phono plug) included in the kit, in case your audio
system requires this.
After you connected the cables, you can pair the BT Sound with your Bluetooth® device.
In above pictures you can see that the BT Sound is connected to an amplifier (left), where
we’ve used the converter cable. In the car audio system (on the right) we’ve directly
connected the audio cable to our car audio system.
Pairing with your Bluetooth® Device
1. The distance between the BT Sound and your Bluetooth® Device would be best within
30 to 100 centimetre when pairing.
2. Make sure that the BT Sound is turned off.
3. Press and hold the On/Off Button until the light stays blue.
4. Search the ebode BT Sound on your Bluetooth® Device by following the Bluetooth®
Device instructions.
5. After a few second your Bluetooth® Device will list the “ebode BTR30” as a device.
Select it and follow your Bluetooth® Device instruction to complete the connection.
6. If asked, enter passkey “0000”, then press “yes” or “ok”.
IMPORTANT: If pairing is successful, the indicator light will flash blue 10 times rapidly before
going to flashing every 3 seconds. If unsuccessful, the light remains on, and you will need
to reattempt the pairing. If you cannot get a connection after several trials, we advise you
to change the distance between the BT Sound and you Bluetooth® device; too far away
from each other will not work, but neither when they are too close. The light will go out if
the pairing time takes more than 60 seconds. If that happens, you need to turn off the BT
Sound and turn it on for pairing again.
Disconnect the BT Sound from your Bluetooth® Device
If you want to disconnect the BT Sound from your Bluetooth® Device, just turn off the BT
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebode BTR30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebode BTR30 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info