780504
73
Zoom out
Zoom in
Previous page
1/76
Next page
Page 73
Code Description
0 NO ERROR
1 THROTTLE-NO-GO-BACK
2 THROTTLE-FAULT
3 TORQUE-FAULT
4 LOW-VOLTAGE-PROTECTION
5 OVER-VOLTAGE-PROTECTION
6 HALL-SENSORS-FAULT
7 OVER-TEMPERATURE-PROTECTION
8 TEMPERATURE-SENSOR-FAULT
9 CURRENT-SENSOR-FAULT
10 BMS-COMMUNICATION-FAULT
11 COMMUNICATION-FAULT-LOST-FRAME-JOB
12 DRIVER-ERROR-VG-UNDERVOLTAGE
13 DRIVER-ERROR-OVERTEMPERATURE
14 DRIVER-ERROR-OVERCURRENT
15 DRIVER-ERROR-VDD-UNDERVOLTAGE
16 PHASEI-SCG
17 PHASEII-SCG
18 PHASEIII-SCG
Corrective Measure
Not needed
Switch off the eBike System. Ensure that the throttle is released and try
again.
Throttle damaged or out of operation specifications. Contact your eBike
dealer
Torque damaged or out of operation specifications. Contact your eBike
dealer.
Battery Pack voltage too low. Please charge the battery Pack.
The Battery Pack voltage is not correct for this system. Please install the
specific Battery Pack for your eBike System.
Check the motor wire connection. Restart the eBike System. If the problem
persists, contact your eBike dealer.
The eBike is outside of the permissible temperature range. Switch off the
eBike and allow the drive unit to either cool down or heat up to the
permissible temperature. Restart the system. If the problem persists, contact
your eBike dealer.
Temperature sensor damaged. Contact your eBike dealer.
Current sensor damaged. Contact your eBike dealer.
Error in the communication with the Battery Pack. Please check the battery
Pack connector. If the problem persists, contact your eBike dealer.
Error in the communication with the Remote control. Please check the
remote connector. If the problem persists, contact your eBike dealer.
Battery Pack voltage too low. Please charge the battery Pack
The eBike is outside of the permissible temperature range. Switch off the
eBike and allow the drive unit to either cool down or heat up to the
permissible temperature. Restart the system. If the problem persists,
contact your eBike dealer
Current supplied by the Battery Pack is too high. Please reduce the
demand. If the system locks, please restart the eBike System. If the problem
persists, contact your eBike dealer
Battery Pack voltage too low. Please charge the battery Pack
Check the motor wire connection. Restart the eBike System. If the problem
persists, contact your eBike dealerr
Check the motor wire connection. Restart the eBike System. If the problem
persists, contact your eBike dealer.
Check the motor wire connection. Restart the eBike System. If the problem
persists, contact your eBike dealer.
73


Need help? Post your question in this forum.

Forumrules
1

Forum

ebikemotion-app

Reset search

  • problemen bij registratie/aanmaken nieuwe account ebikemotion. al vele malen opnieuw geprobeerd, op verschillende tijdstippen op verschillende dagen, tevergeefs. vind ok niets terug in handleiding of faq Submitted on 11-7-2022 at 20:15

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ebikemotion App at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ebikemotion App in the language / languages: English as an attachment in your email.

The manual is 18.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info