603549
20
Zoom out
Zoom in
Previous page
1/32
Next page
20 | VEHICLE HEATERS – TECHNICAL DOCUMENTATION
BITTE BEACHTEN!
If the
symbol is not displayed in the Menu bar, the
heater is in ADR mode; preselected heating mode is
not possible here.
When programming the EasyStart Timer, note the
operating mode as described in the following.
DEPARTURE TIME OPERATING MODE (FACTORY
SETTING)
Under the following conditions the preselected heat-
ing mode is not started on the current day.
The current day and the preselected day are iden-
tical.
The current time lies within the time period, depar-
ture time minus operating time.
Example:
Current day / preselected day: Thu
Current time: 18:45
Departure time: 19:00
Operating time: 30 minutes
Duration: 18:30 to 19:00
The current time lies within the time period, the
heater is not switched on.
The program will be run during the next week.
START TIME OPERATING MODE
In Start Time operating mode the heater is started
on the preselected day and when the set time is
reached.
3 OPERATION AND SETTING/ADJUSTMENT
GENERAL INFORMATION ON PROGRAMMING THE
PRESET TIME
The programming of the preset time is carried out in
menu item
.
The EasyStart Timer can be used to program 3 preset
times. The 3 preset times can either all take place on
one weekday or can be distributed between different
weekdays.
3 weekday ranges are available to choose from,
these can each be started daily with a preset time.
Weekday ranges:
Sat – Sun 2x HEATING / VENTILATION
Mon – Fri 5x HEATING / VENTILATION
Mon – Sun 7x HEATING / VENTILATION
If the system is activated with programmed weekday
range, all weekdays are worked through consecu-
tively; after that renewed programming is required.
Example:
If the EasyStart Timer with a programmed weekday
range Mon – Fri is activated on Sunday, the heater
heats or ventilates from Monday to Friday with the
set defaults (5x HEATING / VENTILATION).
If the EasyStart Timer with a programmed week-
day range Mon – Fri is activated on Wednesday, the
heater heats or ventilates on Thursday and Friday, the
heater is not operated on Saturday and Sunday. From
Monday to Wednesday of the following week the
operation is continued with the set defaults
(5x HEATING / VENTILATION).
After a weekday range has been worked through
renewed programming is required.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eberspacher EASYSTART TIMER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eberspacher EASYSTART TIMER in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eberspacher EASYSTART TIMER

Eberspacher EASYSTART TIMER User Manual - German - 32 pages

Eberspacher EASYSTART TIMER User Manual - Dutch - 32 pages

Eberspacher EASYSTART TIMER User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info