701118
10
Zoom out
Zoom in
Previous page
1/29
Next page
10
D
S
GB
F
Wire harness connection, right or left
If necessary, the wire harness connection can also
be converted to the opposite side of the heater.
To this end, the control unit needs to be dismantled
and the bottom half-round wire harness covering
unclipped.
The wire harness can now be relayed in the control
unit.
Afterwards, reinstall the control unit, put on the shell
and while doing so, insert the wire harness bush and
the blind plug into the corresponding recesses in the
bottom shell.
Permissible mounting positions
The
AIRTRONIC
should preferably be installed in the
normal position - as indicated in drawing.
Depending on the installation conditions, the
AIRTRONIC
can be mounted according to diagram 1
at a slant of up to max. 30° (direction of flow
downwards!), or swivelled around its own longitudinal
axis through max. 90° (exhaust pipe vertical, glow
plug pointing upwards!). On account of the inclined
position of the vehicle or boat while travelling, during
heating operations the illustrated normal or maximum
positions can vary up to +15° in all directions without
impairing the functions of the heater.
Hot air intake (impeller)
Position of glow plug
Direction of flow
Normal position horizontal (exhaust pipe to the
bottom) with permissible swivel range)
Visit www.butlertechnik.com for more technical information and downloads.
www.butlertechnik.com
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eberspacher D4S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eberspacher D4S in the language / languages: English as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info