Manual Easypix V130 (page 2 of 2) (English)

479788

Zoom out

Zoom in

1/2

5.2 Inserting a memory card (not included)

This camera has built-in internal memory. This memory can be extended with a SD memory card

(not included).

Follow the instructions given below to insert the optional SD memory card into the camera.

1. Open the camera’s battery door by sliding it downwards.

2. Insert the SD card into the slot.

3. Press the SD card completely into the camera and then close the door. Open the door and

press on the memory card if you wish to remove it.

Note: There is only one right direction to insert the SD memory card into the slot. Do not force the

card into the slot, or else it may damage both the camera and the SD memory card.

Note: The SD memory card must be formatted before taking photographs. See the following

sections for more information.

5.3 Setting your camera

In the mode you can set all the option of you camera;

1. Press MODE to select the mode (picture or video) you want to set;

2. Press MODE and hold it to enter system setting menu;

3. Select what you want to set by NEXT, and press OK to confirm;

4. Set the option you selected by NEXT, and press OK again to confirm;

5. Press MODE to exit.

5.4 Taking photographs

1. Slide the power ON/OFF to activate your Digital Camera.

2. Set the camera to photo mode (

3. Use the LCD screen to aim the object you wish to photograph.

4. Press Shutter button and hold the camera steadily for 2 to 3 sec, until the LCD display turn

on again.

5. You can press and hold MODE to set proper resolution, Self-time shot and so on, and

press shutter to confirm, and press and hold MODE again to return.

Note: If you take photographs with the default camera settings, it is possible that the quality of the

photographs will not always be optimal. Different surroundings produce different results.

Adjust the camera settings as required.

5.5 Zoom in and out

The camera can zoom in up to 4 times in preview mode by pressing ZOOM (1x-4x-1x), and you

can also use it to zoom in/out photographs in playback mode.

5.6 Taking photographs using self-timer function

You can use the self-timer function when you wish to take a photograph of yourself or when you

wish to photograph an object where the camera must be as still as possible, for example on the

stand.

1. Set the camera to photo mode (

2. Press and hold the MODE button. The quick menu will appear.

3. Press NEXT to select self-timer mode, and press OK to confirm

4. Setting the time with NEXT button(10S), and press OK to confirm

5. Press MODE to complete your setting. The self-timer function is now ready for use, and the

ICON will be shown on the top of the LCD.

6. Aim the object you wish to photograph.

7. Press the shutter button to take a photograph.

8. The photograph will be taken after the time delay you set, and the camera will beep once.

5.7 Recording video clips

1. Press the MODE button to select video mode ( ),

2. Press the shutter button to start recording video, press the shutter button again for a pause.

The video clip will now be saved as an AVI file in the camera memory.

3. You can press and hold MODE to set proper resolution, and press shutter to confirm.

5.8 Playback photographs or video clips

1. Press Playback button , it will show video clips or photos picture on the LCD

2. Press NEXT to review next the photo or video clip.

3. Press MODE again to exit the Playback mode.

Note: The video clip will auto run if you select it until you select others.

5.9 Delete photographs and video clips

You can choose to delete a single photograph / video clip, or Format the memory.

Follow the instructions given below to delete photograph/video clips.

1. Press playback button, enter playback mode.

2. Select the photo or video clip you want to delete with NEXT key;

3. Press and hold MODE button to enter the menu,

4. Select Delete one

/ Format memory with NEXT key, Press OK to confirm.

5. Select √ and press OK to confirm again, you will exit the menu.

6. You can also press and hold MODE to exit.

NOTE: ‘Format memory ’, the files in camera will be deleted all.

6. Press the smile button to send out “smile”

sound before taking photo

7. Installing the camera driver

The driver in the CD has to be installed for windows ME, Windows 2000, Windows XP Windows

Vista to use as a PC cam only. (Download picture /video is driver free).

7.1 Uninstalling old drivers and devices

There is a chance for a conflict between the new driver and an existing driver in the computer. In

that case, it is better to remove those drivers before installing the new driver.

1. Enter Windows ‘Safe Mode’ (press F8 when starting Windows and then select ‘Safe Mode’

from the menu which will be displayed).

2. Click on ‘Start – Settings – Control Panel’ and double-click on ‘Add/Remove Programs’

icon.

3. Find all the programs for similar, old devices and remove these by clicking on the

‘Add/Remove’ button. When in ‘Safe Mode’, it is possible for some programs to appear

twice. In that case, remove all the programs which appear twice.

4. Restart the computer.

7.2 Installing the driver for Windows XP/ Windows Vista

Note: Make sure all other programs are closed during the installation process.

Note: During installation for Windows XP, you may receive a message saying that the driver has

not been signed. This does not cause a problem for the functionality of the program. Please

click "Yes" to continue.

Note: For example, ‘D: \’ is used to indicate the CD-ROM drive. This may be different for your

computer.

1. Insert the CD-ROM into your computer’s CD-ROM drive. The installation program will start

automatically. If it does not start automatically, please do the following:

a) Select 'Run' from Windows Start menu.

b) Type [D:\SETUP.EXE] and click on 'OK' to start the Software Installer.

2. The Software Installer will appear.

3. Select the language you wish to use for the installation.

4. Click on ‘Install driver to start the installation of the camera driver.

5. Follow the on-screen instructions.

7.3 Connecting the camera

The camera can be connected to the computer in two different modes: mass storage device and

PC camera.

7.3.1 Connecting as a mass storage device

This option makes it possible to download photographs and video clips onto your computer.

1. Slide the power ON/OFF switch to activate your Digital Camera.

2. Press and hold MODE button to enter system setting menu.

3. Press NEXT button to select USB connection, and press OK to confirm.

4. Press NEXT button to choose the mass storage mode.

5. Press OK to confirm.

6. Connect the camera to the computer.

7. Windows will automatically detect the camera. You can use this camera as a removable

disk.

7.3.2 Connecting as a PC camera

When you connect the camera as a PC camera, you can use the camera as a web cam for video

conferencing on the Internet by using Windows NetMeeting or Windows Messenger.

(You must install the driver before connecting the Digital Camera to your computer).

1. Slide the power ON/OFF switch to activate your Digital Camera.

2. Press and hold MODE button to enter system setting menu.

3. Press NEXT button to select USB connection, and press OK to confirm.

4. Press NEXT button to choose the PC Camera mode.

5. Press OK to confirm

6. Connect the camera to the computer.

7. Windows will automatically detect the camera. You can use this camera as a web camera.

8. Trouble shooting

Problem Cause Solution

Cannot turn on the

camera by pressing the

“power” button.

Low battery power, battery

is missing or incorrectly

inserted the battery.

Install or replace the battery

correctly.

Photos are not saved or

are missing when taking

pictures.

The built-in memory hasn’t

been formatted properly in

the camera.

Format the memory in system set

mode of the camera. Please refer

to section 5.4.

Cannot find removable

disk after connecting the

camera to the computer

via USB

1. Connection failure.

2. The mode of the camera

is not set to removable

disk properly

1. Make sure all cable connections

are secured and restart the

computer.

2. Set the camera to removable;

refer to section 7.3.1 (system

setting, USB connection).

The photos are blurry

1. The camera is not held

steadily

2. The lens of camera is

dirty

1. Hold the camera steadily until it

beeps when takes photo.

2. Clean the lens with soft dry

cloth.

Get a warning message:

“Capture device was not

detected” when trying to

open PC cam.

1. Conflict with another

camera or capture

device.

2. The mode of the camera

is not set to PC cam

mode properly.

1. Remove any other camera

driver completely from your

system. Sometimes you have to

re-install your system.

2. Set the camera to PC cam

mode; refer to section 7.3.2

(system setting, USB connection).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Easypix V130 in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Easypix V130

Easypix V130 User Manual - German - 2 pages

Easypix V130 User Manual - Dutch - 2 pages

Easypix V130 User Manual - French - 2 pages

Easypix V130 User Manual - Italian - 2 pages

Easypix V130 User Manual - Portuguese - 2 pages

Easypix V130 User Manual - Spanish - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Easypix V130 Manual

Product: