CHARGING THE BATTERY
Caution Do not use charger before inserting battery!!!
Your communicator comes with an A/C Adapter charger to charge your
Lithium-Ion battery. To charge:
1. Lift the Headset/Charger Jack Cover located on the side of your unit
2. Connect the A/C Adapter Charger into an A/C Wall outlet
3. Insert the A/C Adapter Charger into the Headset/Charger Jack. During charging the
Low Battery Level icon will appear on the display, and will disappear once the
battery is fully charged .
NOTE: Charge the battery for approximately 6 hours before initial use. Normal
charging time is for 3 hours .
Headset/Charger
Jack Cover
BATTERY LEVEL AND LOW BATTERY OPERATION
In Watch and Communicator Mode the Low Battery Level icon will not appear on the
display unless the unit detects that the battery is low. The unit has a Low Battery Level
icon which will appear when it detects a low battery level in Communicator Mode, and
in Watch Mode. When the unit is in Communicator Mode and the battery level is low
the icon will appear for approximately 15 seconds and then will automatically change
to Watch.
NOTE:
The communicator comes with internal battery protection; however, during
long-term storage, it is strongly recommended that you recharge the battery
every 6 months or remove the battery if the unit will not be used for a long
period of time.
