Manual Easypix GoXtreme WiFi Control (page 11 of 30) (English)

583053

Zoom out

Zoom in

1/30

User Manual

Thank you for buying the GoXtreme WiFi Control action camera. Before start using this product, please read

this manual carefully to maximize its performance and extend the life of the product.

Appearance and Buttons

1. Shutter button 8. Micro USB port

2. Microphone 9. Mini HDMI port

3. LCD display 10. Micro SD card slot

4. Lens 11. External microphone

5. Wi-Fi switch and status indicator 12. Battery cover push switch

6. Power / Mode button 13. LED light

7. Infrared signal reception light

LCD Display Illustration

Turn on the GoXtreme WiFi Control, the LCD will display the following status and settings:

1. Camera mode

2. Video recording mode (default)

3. Wi-Fi icon (display when enabled)

4. TF card icon (display when loaded)

5. Resolution icon:

In camera mode, HI stands for 8 Mega Pixels (3264x2448), and in video recording mode, it stands for FHD

(1920x1080,30fps);

In camera mode, LO stands for 5 Mega Pixels (2592x1944), and in video recording mode, it stands for 720P

(1280x720,30fps);

HILO only displays in video recording mode, standing for 720P (1280x720,60fps).

6. Mute mode, displays when enabled, and disabled by default.

7. Counter, displays up to 999.

8. Timer, displays hours and minutes.

9. Battery icon: current battery level of the camera.

Note: the above icons may vary according to the status of the GoXtreme WiFi Control.

Working Mode Flow Chart

After turn on the GoXtreme WiFi Control, you can press the Power/Mode button to switch the following modes

in turn:

Camera mode (8MP)

Camera mode (5MP)

Video mode (720P ,60fps)

Video mode (720P,30fps)

Video preview mode (1080P default)

In video mode, press the Shutter button to start recording, LED flash, and press it again to stop;

In camera mode, press the Shutter button to take photo.

Use your GoXtreme WiFi Control

When you use the GoXtreme WiFi Control for the first time, please:

1. Insert a micro SD or micro SDHC card, as shown in the following picture.

High speed card at least Class 4 is recommended; Turn off the DV before inserting or removing the card.

2. Install the battery

Please install the lithium battery correctly as shown in the following picture.

Picture 1 Picture 2 Picture 3 Picture 4

Step 1. Push the battery cover switch to the lock position( ),and remove the battery cover.

Step 2+3. Put the battery into the battery slot. Make sure that the electrodes of the battery are corresponding

to the symbols of the DV shell ( ).

Step 4. Install the battery cover back in place and lock the switch to the lock position to fix the battery ( )

3. Charging the battery. The DV uses a rechargeable lithium battery. When the DV is off, connect it to the PC

via USB cable to charge the battery. During charging, the status indicator (blue) will light on, and the

indicator off when charging completes.

Note: When the DV is on, connecting it to the PC will not charge.

Turn on/off

1. Turn on: press and hold the button for about 3 seconds, LCD displays “ON” and a beep can be heard

from buzzer.

2. Turn off: press and hold the button for about 3 seconds, LCD displays “OFF” and a beep can be heard

from buzzer.

Note: The DV will turn off automatically if it is idle for 5 minutes.

Start to Use

Default setting: After turn on the GoXtreme WiFi Control, the default setting is as below:

Video recording mode icon

The DV is in video recording mode.

Video resolution

FHD: 1080p@30fps

Recording time

Stands for 0 hour and 00 minute.

TF card icon

Display when a TF card is inserted, otherwise no display.

Battery level

Battery is full

Mute icon

The DV is in Mute mode, no Beep will be heard when pressing

the buttons. It displays only when Mute mode is activated.

Wi-Fi icon

Display when activated.

The GoXtreme WiFi Control provides different shooting modes. Press the button repeatedly, the

following mode will display in turn:

Video

HI stands for FHD (1920x1080,30 fps) video

Lo stands for 720P (1280x720,30 fps) video

HILO stands for 720P (1280x720,60 fps) video

Photo

HI stands for 8M (3264 x 2448) resolution

Lo stands for 5M (2592 x 1944) resolution

Continuous shot

The DV supports taking 3 photos continuously (only via App)

Self-timer

In self-timer mode , you can set 0s, 2s or 10s (only via App)

1. Video

To record a video, please check whether the DV is under Video mode. If the icon is not displayed on the

screen, press the button repeatedly until it appears.

Start recording: Press and release the button, the icon and [:] displayed in LCD will flash. At the

same time the red indicator will flash too, meaning the recording is in process.

Stop recording: Press and release the button, the icon and [:] displayed in LCD will stop flashing.

At the same time the red indicator will stop flashing either, meaning the recording is stopped.

When the TF card is full, or the battery runs out, the recording will stop automatically, and the recorded video

will be saved before the DV turns off.

After reaching a max. video recording time of 29 minutes the camera will automatically stop. It can

only be restarted manually.

2. Photo

To take a photo, please check whether the DV is under Camera mode. If the icon is not displayed on

the screen, press the button repeatedly until it appears.

Press and release the button, a beep will be heard and the red indicator will flash, meaning a photo is

taken.(If you take photos more than 999 copies, the LCD screen display only 999)

3. Vehicle Mode

When using the camera it in the car, connect it first to the charger and then switch on the ignition. It will power

on and record 1080P video automatically. It will record a video segment every 5 min. automatically. When the

storage is full, then it will delete the first recording to creating new space on the card. When switching the car

power off, the cam will save the videos automatically and power off after 10 sec.

Note: WIFI mode nor button operations can be used whilst operating in the vehicle mode.

4. Enable/disable Wi-Fi

The Wi-Fi is disabled by default. Press the Wi-Fi button on the side of the DV to enable it. When starting

connecting to Wi-Fi network, the indicator will flash, and when a Wi-Fi network is connected, the indicator will

remain on, and the Wi-Fi icon will display on LCD screen. (In order to save power, Wi-Fi will be automatically

disabled if no terminal is connected after 30 seconds)

Wi-Fi is disabled by default When Wi-Fi is enabled, the

Wi-Fi icon will display on LCD

5. Enable/disable Mute mode

The buzzer is enabled by default. Under the Video or Photo mode, press and hold the Shutter button to

disable the buzzer and indicator to enter Mute mode. Under Mute mode, the icon will display on the

screen; press and hold the Shutter button again to exit Mute mode.

Buzzer is enabled by default When Mute mode is enabled,

the Mute icon will display on LCD

6. Connecting to HDTV

6.1 Connect the DV to HDTV via HDMI cable (optional)

If you need to transfer the image and audio to an HDTV for playback, insert the Com end of the HDMI cable to

the DV, and the other end (output) to the HD input of the HDTV, as shown in the following figure:

Note: Before connecting or removing the HDMI cable, please stop video recording, playback and

disconnect Wi-Fi first.

6.2 When HDTV is connected, it enters Playback mode, the LCD displays as below:

S/N

Icon name

Description

Playback mode

Under Playback mode currently.

File number

There are 31 files and you are viewing the 19

one.

In Playback mode, press the Power button to switch between photos and videos. When there are

several photos or videos, press the Wi-Fi button to select the photo or video. When a video file is

selected, press the Shutter button to play it, and press the Shutter button again to stop playing.

In Playback mode, press and hold the Shutter button , a prompt of deleting the file or formatting will

appear. Press the Wi-Fi button to switch between deleting or formatting, then press the Power

button to select Yes or No, and press the Shutter button to confirm and exit.

Video icon

The file is a video.

7. Connecting to PC

7.1 Turn on the DV and connect it to the USB port of the PC via the attached USB cable. The DV will enter

U-disk mode and the LCD will display as below after connection:

Now you can view the photos or videos taken by DV on PC.

Note: After the DV connecting to PC to enter U-disk mode, you will see two removable disks displayed

in My computer of Windows, one is the TF card, storing all the photos taken and video recorded by

users; the other one stores the system file information, including a file named SSID_PW.CFG,

containing the AP ID of the DV and the password for AP login. Users can view this information but

cannot modify, delete or format them.

7.2 In U-disk mode (PCU mode), press the Shutter button to switch to web cam mode (PCC mode), and

the LCD will display as below:

Now you can start the web cam through application. To return to U-disk mode (PCU mode), press the

button again.

Note: Driver is not required for web cam mode (PCC mode) on Windows XP (SP3) version or above.

Remote Controller Application

Buttons

Instruction

You can use the remote controller to record videos, take photos and shut down the DV. When using the

remote controller, aim the signal emission port to the infrared signal reception light of the DV, and press the

video button, photo button or power off button.

Signal emission port

Power off button

Video button

Photo button

APP (support Android and iOS)

1. How to install an APP

1.1 Search for ”SYMAGIX” in Google Play (for Android OS),or scan the QR code printed on

the gift box to find the APP and install it according to the instruction.

Infrared signal reception light

1.2 Search for ”SYMAGIX” in APP Store (for iOS) or scan the QR code printed on the gift box

to find the APP and install it according to the instruction.

2. Android APP

2.1 Install SYMAGIX APP (provided by dealer or via internet) on Android phone or tablet. When installation

completes, the LCD will display icon .

2.2 Insert the TF card and turn on the DV, then press the Wi-Fi button to enable it. Now you can see the Wi-Fi

icon on the LCD.

2.3 Enable Wi-Fi on Android phone or tablet and search for wireless AP signal “GoXtreme WiFi Control”, then

connect it to DV, until the system displays “Connected successfully”.

Note: While connecting to DV for the first time, you need to enter password “1234567890”. And will not

require typing the code again once connected previously.

2.4 Click the icon in the App list of the Android phone or tablet to open it. Now you can preview the

image sent by the DV on the phone or tablet and start some operating. The operation interface on terminal is

shown in the following figure.

1. Video resolution

2. White balance

3. Setup (enter setup menu)

4. Enter Playback mode

5. Shutter button

6. Photo mode

7. Video mode

8. Wi-Fi signal icon

9. DV battery icon

3. iOS APP

3.1 Install SYMAGIX APP (provided by dealer or via internet) on iOS phone or tablet. When installation

completes, the LCD will display icon .

3.2 Insert the TF card and turn on the DV, then press the Wi-Fi button to enable it. Now you can see the Wi-Fi

icon on the LCD.

3.3 Enable Wi-Fi on iOS phone or tablet and search for wireless AP signal “GoXtreme WiFi Control”, then

connect it to DV, until the system displays “Connected successfully”.

Note: While connecting to DV for the first time, you need to enter password “1234567890”. And will not

require typing the code again once connected previously.

3.4 Click the icon in the App list of the iOS phone or tablet to open it. Now you can preview the image

sent by the DV on the phone or tablet and start operating. The operation interface on terminal is shown in the

following figure.

1. DV battery icon

2. Video resolution

3. White balance

4. Setup (enter setup menu)

5. Enter Playback mode

6. Shutter button

7. Photo mode

8. Video mode

Note:

1. A TF card must be inserted if you need to take a photo, record a video or download files on the

terminal.

2. The Wi-Fi indicator will remain on when the terminal is connected to DV.

NOTE:

Please use microSD cards up to 32GB, minimum Class6 (not included).

Recording times are depending on resolution.

Battery life time - depending on settings and outdoor temperature - up to 90 min. under optimal

conditions.

Before using your camera in the water please verify that all lids and locks are tightly closed and sealed

on the camera and the underwater case.

After use, clean the housing of salt and chlorine water and then let it dry.

The camera should not be exposed to large temperature and humidity differences to avoid

condensation inside the housing or behind the lens.

After underwater use, the case must be kept open to avoid condensation or rust.

DECLARATION OF CONFORMITY

easypix herebly declares that the product GoXtreme WiFi Control is in conformity to all the essential

requirements of Directive 1999/5/EC. The declaration of conformity can be downloaded here:

http://www.easypix.info/download/pdf/doc_goxtreme_wifi_control.pdf

For technical help please visit our support area on www.easypix.eu.

Only EU

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Easypix GoXtreme WiFi Control in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Easypix GoXtreme WiFi Control

Easypix GoXtreme WiFi Control User Manual - German - 33 pages

Easypix GoXtreme WiFi Control User Manual - Dutch - 32 pages

Easypix GoXtreme WiFi Control User Manual - French - 33 pages

Easypix GoXtreme WiFi Control User Manual - Italian - 32 pages

Easypix GoXtreme WiFi Control User Manual - Portuguese - 33 pages

Easypix GoXtreme WiFi Control User Manual - Spanish - 33 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Easypix GoXtreme WiFi Control Manual

Product: