Manual Easypix Aqua W311 (page 2 of 2) (English)

100967

Zoom out

Zoom in

1/2

5.3 Formatting the memory card

1. Press MODE button

2. Select system setting by 4 way keys

3. Press OK to confirm.

4. Select format storage press OK to confirm.

5. Press OK to format the card.

5.4 Setting the resolution

The camera can be set to three different resolutions.

1. Press MENU to set proper resolution.

Resolution: 2M (1600 x 1200), 3.1M (2048X1536), 5M (2560 x 1920)

2. Three different resolutions will be displayed. Select the desired resolution by using the

or buttons and then press the MENU button to confirm the selection.

5.5 Taking photographs

1. Turn the camera on by pressing the ON/OFF button.

2. Set the camera to photo mode ( ).

3. Depending on the distance to the object being photographed, use Macro switch to

adjust the distance. Select the flower symbol ( ) if you wish to take a close-up

photograph (11cm – 18cm.).

If you wish to take photograph of surroundings or people (0.5m - infinity), set the macro

switch to normal mode ( ).

4. If you are not sure if there is enough lighting, turn the automatic flash ( ) on by pressing

the flash button. (If the battery power is low, the flash won’t be activated).

5. Use the LCD screen to aim the object you wish to photograph.

6. Press Shutter button and hold the camera steadily for 2 to 3 sec, until the LCD display

turn on again.

Note: If you take photographs with the default camera settings, it is possible that the quality of

the photographs will not always be optimal. Different surroundings produce different

results. Adjust the camera settings as required.

5.6 Zoom in and out

5.6.1 The camera can zoom in up to 4 times in preview mode.

1. Zoom in by pressing the

▲

button, a bar will appear on the left -hand side of the display.

4.0 is maximum zoom.

2. You can zoom out by pressing the down arrow button.

3. Press the shutter button once you have found the desired setting.

5.6.2 The picture can zoom in and move in playback mode

1. Zoom in by pressing the

▲

button.

2. Press OK button, the picture can be moved 4 ways by pressing the 4way buttons.

3. Press OK button to return to zoom in mode.

5.7 Taking photographs using self-timer function

You can use the self-timer function when you wish to take a photograph of yourself or when you

wish to photograph an object where the camera must be as still as possible, for example on the

stand.

1. Set the camera to photo mode( ) .

2. Press the MENU button. The quick menu will appear.

3. Press

▼

to self-timer mode, press or to set the delay time: 10/15/20 seconds or

off.

4. Press the MENU button to confirm. The self-timer function is now ready for use.

5. Aim the object you wish to photograph.

6. Press the SHUTTER button to take a photograph.

7. The self-timer indicator LED in the front will blink.

8. The photograph will be taken after the time delay you set, and the camera will beep

once.

5.8 Recording video clips

1. Press the MODE button and press or to select video mode ( ), Press OK to

confirm.

2. Press the SHUTTER button to start recording video, press the SHUTTER button again to

stop recording. The video clip will now be saved as an AVI file in the camera memory.

3. Press MENU to set proper resolution, EV and WB, and press MENU again to confirm.

5.9 Viewing photographs

Once you have taken some photographs or recorded video clips, you can view them on the

LCD screen. Follow the instructions given below to do this.

1. Press PLAYBACK button, press or to select the video clip or photo.

2. Press OK, it will show video clips and photos thumbnails on the LCD.

3. Press ▲,▼, or to navigate, then press OK, the selected photo will be shown on the

LCD

4. Press MENU to select SLIDE SHOW, and then press OK to confirm. The pictures saved

in your camera or your SD card will show automatically.

5.10 Playback video clips

1. When video clips are played, press

▲

to play,

▼

again to fast forward, and press

▼

rewind.

2. Press or to adjust the volume

3. Select icon

to pause the playback

4. Press PLAYBACK key to exit.

5.11 Recording voice

1. Press MODE button,

2. Press or to select the voice recording mode, then press OK to confirm.

2. Press SHUTTER to start voice recording and press again to stop.

5.12 Playback voice files

1. Press MODE button, and press or to select the Voice Playback mode,

2. Press OK to confirm.

3. Press OK to playback the selected voice file.

4. Press or to adjust the volume

Caution:

This camera has no built-in speaker, you can playback the voice Via TV.

5.13 Delete photographs and video clips

You can choose to delete a single photograph / video clip, or delete all the photographs / video

clips from the memory.

5.13.1 Delete photograph

Follow the instructions given below to delete photograph.

1. Press PLAYBACK to entry playback mode.

2. Press the MENU button and select delete one/Delete all, press OK to confirm.

3. If you select Protect picture, your current file or images can not be deleted.

4. Press MODE to exit.

NOTE: Select ‘Deleting All’ Press OK to confirm all the files will be deleted.

5.13.2 Shortcut to delete one picture

1. Press PLAYBACK to entry playback mode.

2. Select the photo (video) you want to delete, press DELETE button.

3. Press OK to confirm or Menu to exit.

6. Installing the camera driver

The driver in the CD has to be installed:

1. For windows 98 SE: Download picture /video, and as a PC cam.

2. For windows ME, Windows 2000 and Windows XP: For using as a PC cam only.

(Download picture /video is driver free)

6.1 Uninstalling old drivers and devices

The most common problem occurring during installation is the presence of a driver for a similar,

old device. The best solution is remove all the drivers related to the old devices before installing

the new driver. Make sure you only delete programs for old, unused (similar) devices.

1. Enter Windows ‘Safe Mode’ (press F8 when starting Windows and then select ‘Safe

Mode’ from the menu which will be displayed).

2. Click on ‘Start – Settings – Control Panel’ and double-click on ‘Add/Remove Programs’

icon.

3. Find all the programs for similar, old devices and remove these by clicking on the

‘Add/Remove’ button. When in ‘Safe Mode’, it is possible for some programs to appear

twice. In that case, remove all the programs which appear twice.

4. Restart the computer.

6.2 Installing the driver for Windows 98 / Windows ME /

Windows 2000 / Windows XP

Note: Make sure all other programs are closed during the installation process.

Note: During installation for Windows XP, you may receive a message saying that the driver

has not been signed. This does not cause a problem for the functionality of the program.

Please click "Yes" to continue.

Note: For example, ‘D:\’ is used to indicate the CD-ROM drive. This may be different for your

computer.

1. Insert the CD-ROM into your computer’s CD-ROM drive. The installation program will

start automatically. If it does not start automatically, please do the following:

a) Select 'Run' from Windows Start menu.

b) Type [D:\SETUP.EXE] and click on 'OK' to start the Software Installer.

2. The Software Installer will appear.

3. Select the language you wish to use for the installation.

4. Click on ‘Install driver‘ to start the installation of the camera driver.

5. Follow the on-screen instructions.

6.3 Connecting the camera

The camera can be connected to the computer in two different modes: mass storage device

and as a PC camera for video conferencing on the Internet.

6.3.1 Connecting as a mass storage device

This option makes it possible to download photographs and video clips onto your computer.

1. Turn the camera on by pressing the ON/OFF button.

2. Press MODE button and select the system setting.

3. Press

▼

button to set USB connection.

4. Press or button to choose the mass storage mode.

5. Connect the camera to the computer.

6. Windows will automatically detect the camera. You can use this camera as a removable

disk.

6.3.2 Connecting as a PC camera

When you connect the camera as a PC camera, you can use the camera as a web cam for

video conferencing on the Internet by using Windows NetMeeting or Windows Messenger.

(You must install the driver before connecting the Digital Camera to your computer. )

1. Turn the camera on by pressing the ON/OFF button.

2. Press MODE button and select the system setting.

3. Press

▼

button to chook USB connection.

4. Press or button to choose the PC camera mode.

5. Connect the camera to the computer.

6. Windows will automatically detect the camera. You can use this camera as a web

camera.

7. Trouble shooting

Problem

Cause

Sol

ution

Cannot turn on the camera

by pressing the “power”

button.

Low battery power, battery

is missing or incorrectly

inserted the battery.

Install or replace the battery

correctly.

Photos are not saved or are

missing when taking

pictures.

The memory card or built-in

memory hasn’t been

formatted properly in the

camera.

Format the memory in SET mode

of the camera. Please refer to

section 5.3.

Cannot find removable disk

after connecting the camera

to the computer via U

SB.

1. Connection failure.

2. The mode of the camera

is not set to removable

disk properly

1. Make sure all cable

connections are secured and

restart the computer.

2. Set the camera to removable,

refer to section 3 (system setting,

USB connection).

Flash does not work. Battery Power is very low. Replace with fresh alkaline

batteries.

The batteries used up easily

Use wrong type battery. Replace with fresh alkaline

battery.

The photos are over

exposure

Set the flash light to force

mode in bright

environment.

Set the Flash light to Auto

mode .

The photos are blurry

1. The camera is not held

steadily

2. The lens of camera is

dirty

1. Hold the camera steadily until it

beeps when takes photo.

2. Clean the lens with soft dry

cloth.

Get a warning message:

“Capture device was not

detected” when trying to

open PC cam.

1. Conflict with another

camera or capture

device.

2. The mode of the camera

is not set to PC cam

mode properly.

1. Remove any other camera

driver completely from your

system. Sometimes you have to

re-install your system.

2. Set the camera to PC cam

mode, refer to section 3 (system

setting, USB connection).

Cannot preview image in

PC Camera mode.

“Preview” is not selected in

option Menu in PC.

Click “preview” in the “option”

menu to select it.

For EU only

AM-D331T-UGB-STD-R

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Easypix Aqua W311 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Easypix Aqua W311

Easypix Aqua W311 User Manual - German - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Easypix Aqua W311 Manual

Product: