704381
3
Zoom out
Zoom in
Previous page
1/8
Next page
3
Dear customer,
We are delighted that you have decided to purchase this LED
motion detector. If you have any questions, please contact
customer service via our website:
www.service-shopping.de
Proper use/warranty
This product is an LED motion detector. The light turns on if
movement is detected within a radius of approx. 2 metres in
dark environments.
The product is designed for private use and is not intended
for commercial use. Only use the product as instructed. Any
other use is deemed improper. Store the instructions in a safe
place.
Defects arising due to improper handling, damage or attempts
at repair are excluded from the warranty. This also applies to
normal wear and tear.
Safety and care instructions
Risks of injury
Plastic foils pose a risk of choking if swallowed! Keep the
packaging material away from children and animals.
Risk of injury! The product is not a toy! Keep the product out
of the reach of children and animals.
Batteries may be life threatening if swallowed. For this
reason, please stow the batteries and the product in a place
that is not accessible for children and animals. If a battery has
been swallowed, you must seek immediate medical attention.
If a battery has leaked, avoid contact between your skin,
eyes and mucous membranes and the battery acid. In the
event of contact with the battery acid, rinse the affected areas
instantly with plenty of clean water and immediately consult
a physician.
Proper handling of the batteries
Before inserting the batteries, check that the contacts in the
product and on the batteries are clean and, if necessary,
clean them.
Only use the battery type speci ed in the technical data.
Always replace all batteries. Do not use different battery
types, brands or batteries of different capacitances. When
changing batteries ensure correct polarity (+/-).
Remove the batteries from the product if they are empty or
if you are not using the product for an extended period. This
way, you can avoid damages attributed to leaking.
Immediately remove any leaking batteries from the product.
Clean the contacts before you insert a new battery.
The batteries may not be charged or reactivated using other
means, they may not be disassembled, disposed of in re,
immersed in liquids or be short circuited.
Proper handling of the product
In the event of extreme weather (e.g. storm, hail) or if you do
not wish to use the product for a prolonged period of time, we
recommend that you turn the product off, remove the batter-
ies and store the product in a dry place.
Hang the product in a place that is safe, secure and dry.
If you use screws to mount the product, make sure that there
is no risk of damaging pipes or lines located in the intended
drilling area before drilling. Before mounting the product on
the wall, inquire at a specialist dealer about suitable fastening
material.
Never submerge the product in water or other liquids! It is
only splash-proof.
Do not allow the product to fall and do not subject it to severe
percussions.
Do not look directly into the light emitted by the LED lights
and do not point the LED lights directly at people or animals.
Do not disassemble the product if it is defective. Only have
the product repaired by a quali ed workshop or by customer
service.
Do not use the product if it exhibits visible damages.
If the product gets dirty, wipe it off with a damp cloth. Do not
use corrosive or abrasive cleaning products to clean the
product! They could damage the surface.
Product contents
1 x motion detector
4 x type AA 1.5 volt batteries
1 x adhesive strip for mounting the motion detector
Not included in the product contents:
Alternative fastening material like screws, nails or dowels are not
included in the product contents!
Product overview
Front view
Motion detector with
LED lights; tiltable
Motion sensor
rotatable base
Rear view
Battery compartment
ON/OFF switch for activating
and deactivating the product
Bottom of the base
Slot for alternative fastening
materials (screws, nails etc.)
Application area for
adhesive strip
Not shown:
Fastening material (adhesive strip)
GB
Operating instructions
Product number: Z 05592
Z 05592_V0
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Easymaxx Z05592 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Easymaxx Z05592 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info