703712
15
Zoom out
Zoom in
Previous page
1/33
Next page
15 EN
The device is equipped with overheating protection; it switches off if it overheats.
In this case, turn the dial (8) to the 0 position, pull out the mains plug and allow the
device to cool down. It will be ready for use again after approx. 10 – 15 minutes.
1. Place the device on a dry, level, rm and heat-resistant surface.
2. Insert the mains plug into a properly installed plug socket that is easily accessible.
3. Turn the dial to position
. The “ replace look” lighting (2) is switched on behind the
window (1).
4. To switch on the heating function, turn the dial to the position
for heating level 1. To
increase the level of heating, turn the dial to the position
for heating level 2.
Turn back the dial to position
to switch off the heating levels.
5. To switch on the swivel function, turn the dial to the
position.
6. Set the temperature you want (0 – 85°C) with the temperature dial (9).
7. To switch off the device, turn the dial to the 0 position.
8. Remove the mains plug from the plug socket after use.
Cleaning and Storage
PLEASE NOTE!
Pull the mains plug out of the socket and allow the device to cool down completely
before doing any cleaning!
Do not use any caustic or abrasive cleaning agents for cleaning. These can damage
the surface.
Dust down the device if necessary or wipe it down with a damp cloth if necessary.
Then wipe it dry with a dry cloth.
When not in use, the device should be stored in a clean, dry place which is protected
from dust and is not accessible to children and animals.
Troubleshooting
If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps that are listed, contact the cus-
tomer service department.
Do not attempt to repair a defective electrical device yourself!
Problem Possible cause/solution
The device does not
work.
Is the mains plug inserted in the socket correctly?
Is the socket defective? Try another socket.
Check the fuse of the mains connection.
Has the dial (8) been turned at least to the
position?
The safety switch has been triggered. Check whether the
device is currently on a at surface.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Easymaxx YH-09 - Z01505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Easymaxx YH-09 - Z01505 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info