703757
18
Zoom out
Zoom in
Previous page
1/40
Next page
EN 18
20. Close the lid (7).
21. Make sure that the discharge hose (3) leads into a sink or similar outlet so that the
water can drain away during spinning.
22. Move the control dial (9) to Schleudern (spin) and set the timer (1) to the time you
want (max. 15 minutes).
23. The device will start the spin cycle.
24. When the spinning time is up, the device switches off automatically.
25. Open the lid (7).
26. Allow the spin drum (6) to come to a complete stop before you remove it from the
wash drum (4).
27. Remove your laundry from the spin drum and hang it up in the usual way. If the laun-
dry is still too wet, repeat the spin cycle.
28. Move the control dial (9) to Aus (off) and remove the mains plug from the plug socket!
Cleaning and Care
CAUTION!
Never immerse the device, mains cable or plug in water or other liquids.
Do not use any aggressive, abrasive or toxic cleaning agents for cleaning. These can
damage the surface.
Remove the mains plug from the plug socket before cleaning the device!
1. Wipe the outside of the device and the lid with a clean, damp cloth.
2. Wipe the inside of the device with a clean, damp and soft cloth and mild cleaning
agent. Then allow a rinse cycle to run through with clear water (see the “Use” chapter,
“Set-Up, Filling and Connection” and “Rinsing” sections).
3. Allow the device and all accessories to dry completely before you store them away.
4. Store the device in a dry place that is protected from sunlight and is not accessible
to children and animals.
Keep the device ready for operation. You should regularly remove water limescale
deposits with a descaling agent in accordance with the water quality in your area
and how often the device is used. Follow the instructions provided with the des-
caling agent to descale the washing machine.
Troubleshooting
If the device stops working properly, rst check whether you are able to correct the prob-
lem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem Possible cause / solution
The device cannot be
switched on.
Is the control dial (9) in the Waschen (wash) or Schleud-
ern (spin) position?
Is the mains plug correctly inserted in the plug socket?
Is the socket defective? Try another socket.
Check the fuse of your mains connection.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Easymaxx XTB30-8 - Z07475 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Easymaxx XTB30-8 - Z07475 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info