Manual Easymaxx TS-20143 - Z02502 (page 5 of 12) (English, German, Dutch, French)

703751

Zoom out

Zoom in

1/12

EN Instructions

■ In the event of a ﬁ re: Do not extinguish with water! Smother the

ﬂ ames with a ﬁ reproof blanket or a suitable ﬁ re extinguisher.

NOTICE – Risk of Damage to Material and Property

■ Protect the device from naked ﬂ ames, sub-zero temperatures,

persistent moisture, wet conditions and impact.

■ Do not lay or place any heavy objects on the device.

Items Supplied

1 x mini heater

1 x instructions for use

Check the device for transport damage. If the device is damaged

you should not (!) use it, but instead contact our customer service

department.

Device Overview

1 Mains plug

2 ON / OFF switch

3 Heating bars / fan heater

(under the cover)

4 Control panel with display

Control panel

5 + Increase operating time /

temperature

6 Display

7 Timer (1 – 12 hours)

8 Speed – speed of the fan

heater (2 levels)

9 – Reduce operating time /

temperature

Before initial use

Before using the device, remove all packaging materials and any

labels that may be on the device and are used for protection during

transportation or for advertising.

Use

PLEASE NOTE!

■ The heater should only be used in wall sockets in a vertical

position, and not horizontally (lying).

■ The device is equipped with protection against overheating; the

device switches off if it gets too hot. In this case you turn the

ON / OFF switch to the 0 position. You then allow the device to

cool down and remove the plug from the socket. It will be ready

for use again after approx. 10 – 15 minutes.

1. Insert the mains plug into a properly installed socket that is eas-

ily accessible.

2. To switch the device on you turn the ON / OFF switch (2) to the

I position. The display (6) ﬂ ashes “25” (for 25 °C) and the heat-

ing process starts.

3. You can set the required temperature (15 – 32 °C) to higher

with the + button (5) and to lower with the – button (9). The

selected temperature has been reached when the number in

the display stops ﬂ ashing.

4. With the speed regulator (8) you can set the speed of the fan

heater:

– HH – high speed

– LL – low speed

The device automatically stops heating as soon as the

preset temperature in the room has been reached. Once

the room cools down again the device begins heating

again automatically for as long as it is switched on.

5. To switch the device off you turn the ON / OFF switch to the 0

position.

6. Allow the device to cool down and disconnect it from the mains.

Setting the Timer

You can set the operating time between 1 – 12 hours. The device

switches off automatically at the end of this time.

1. Switch the device on (see the “Use” chapter).

2. Press the timer button (7). “0” ﬂ ashes on the display (6). You

can set the operating time for longer with the

+ button (5) or

shorter with the – button (9).

3. When the operating time is no longer visible on the display,

you can select the temperature and speed of the fan heater

(see above). After that the display switches between the preset

operating time and the temperature.

4. The device stops the heating process automatically after the

preset operating time has elapsed.

5. To switch the device off you turn the ON / OFF switch (2) to the

0 position.

6. Allow the device to cool down and disconnect it from the mains.

Cleaning and Storage

PLEASE NOTE!

■ Do not use any caustic or abrasive cleaning agents for cleaning.

These can damage the surface.

• If necessary, wipe down the device with a slightly damp cloth.

• When not in use the device should be stored in a dry place

which is not accessible to children and animals.

Troubleshooting

If the device does not work properly, ﬁ rst check whether you are

able to rectify the problem yourself.

Do not attempt to repair a defective electrical device

yourself!

The device does not work.

• Is the mains plug inserted in the socket correctly?

• Is the socket defective? Try another socket.

• Check the fuse of the mains connection.

Technical Data

Article number: 02502

Model number: TS-20143

Thermostat: 15 – 32 °C

Supply voltage: 220 – 240V ~ 50 Hz

Power: 500 W

Protection class: II

Disposal

The packaging material can be recycled.

Dispose of the device in an environmentally friendly manner

at a recycling centre for used electrical and electronic

devices. More information is available from your local

authorities.

Z 02502 M DS V2 0618

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Easymaxx TS-20143 - Z02502 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Easymaxx TS-20143 - Z02502 Manual

Product: