703715
3
Zoom out
Zoom in
Previous page
1/8
Next page
EN Instructions
Dear customer,
We are delighted that you have decided on this LED TV back-
light.
Before using the device for the rst time, read through the inst-
ructions carefully and retain the instructions. They form an integral
part of the device. If you have any questions, contact the customer
service department via our website:
www.service-shopping.de
Please note: The illustrations used in these instructions may differ
slightly from the actual product.
Explanation of the Symbols
Danger symbols: These symbols indicate risks of inju-
ry. Read through the associated safety notices carefully
and follow them.
Supplementary information
Read instructions before use!
Protection class III
Circuit symbol for direct current
Explanation of the Signal Words
WARNING
warns of possible serious injuries and danger to
life
CAUTION warns of slight to moderate injuries
NOTICE warns of damage to property
Intended Use
This product is suitable for use as a backlight for TV sets or
similar.
The product is exclusively designed for use in dry indoor
spaces. The device is not suitable for use in damp spaces, e.g.
bathrooms.
The product is not a toy!
The product is designed for private household use and is not
intended for commercial use.
Only use the product as instructed. Any other use is deemed
improper.
Defects arising due to improper handling, damage or attempts
at repair are excluded from the warranty. This also applies to
normal wear and tear.
SAFETY INSTRUCTIONS
WARNING – Danger of Suffocation from plastic foils and
bags! Keep the packaging material away from children and
animals.
WARNING – Risk of strangulation! Make sure that the con-
nector cables are always out of the reach of small children and
animals.
WARNING – Danger of Fire and Explosion! The device is
not authorised for use in potentially explosive areas.
WARNING – Danger of Burns from Battery Acid! Batteries
can be deadly if swallowed. Keep batteries and the device out
of the reach of small children and animals. If a battery is swal-
lowed, seek medical assistance immediately.
CAUTION – Danger of Burns from Battery Acid! If a battery
leaks, avoid physical contact with the battery acid, and wear
protective gloves if necessary. If you touch battery acid, rinse
the affected area with abundant fresh water immediately and
contact a doctor as soon as possible.
CAUTION – Danger of Dazzling! Do not look directly into the
light source! Your eyes could be injured.
CAUTION – Danger of falling! Lay the cables so that they do
not pose a tripping hazard.
NOTICE – Risk of Damage to Material and Property
Only connect the product to a device that complies with the
products technical speci cations.
Use only the battery type speci ed in the “Technical Data”.
Take batteries out of the remote control when they are dead or
if you will not be using the product for a prolonged period. This
will prevent any damage if a battery leaks.
Do not use the remote control if a battery has leaked. Clean
the battery compartment immediately with a damp cloth and
then dry it.
Batteries must not be charged or reactivated in any way, di-
sassembled, thrown into a re, immersed in liquids or short-
circuited.
Do not immerse the product or the remote control in water or
expose it to persistent moisture!
Protect the product and the remote control from: impacts, re,
heat, direct sunlight, sub-zero temperatures.
Do not use any additional accessories not recommended by
the manufacturer.
Do not lay or place any heavy objects on the product or the
remote control.
In the event of damage / faults, switch the product off immedi-
ately. Do not use the product if it is damaged.
Do not make any changes to the product and do not attempt to
repair it. In the event of any damage, please contact our custo-
mer service department.
Always mount the product on a dry surface at a suf cient dis-
tance to ammable objects and sources of heat like stovetops,
ovens, heaters.
Do not place any containers lled with liquids, e.g. vases, on or
directly next to the product and cables.
Make sure that the connector cables do not get pinched,
kinked or laid over sharp edges and do not come into contact
with hot surfaces.
The LEDs can’t be replaced.
Do not use corrosive or abrasive cleaning products to clean
the product. They could damage the surface. When needed,
wipe the product off with a soft, dry cloth.
Product contents and product overview
5
1
2
3
4
1 3 x LED strips (50 cm)
2 1 x LED strip (50 cm) including USB cable (100 cm)
3 3 x connector cables (30 cm)
4 3 x connection pieces
5 1 x remote control including 3 V type CR2025 button cell (in-
serted)
• 1 x Instructions
Check the product for any transport damage. If you nd any da-
mage to the product, do not use it (!), but contact our customer
service department. Remove any possible transport protection.
Product number: 05887
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Easymaxx LS520B-RGB-2M - Z05887 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Easymaxx LS520B-RGB-2M - Z05887 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info