772500
6
Zoom out
Zoom in
Previous page
1/10
Next page
2.4,Load Filament and Unload Filament
(1). click home page“preheat”come to preheat pageand click the "+" to increase the target temperature
value on the right side of the diagonal bar to about 200 degrees (the thermometer icon below can change the
value added with each click), The nozzle starts to heat up. When the left side value rises to the temperature
value set on the right, click "Back"
(2).Click the "Extrude" to enter the feeding and retract interface. The value E1 in the middle is the
length of the feeding. Each time you click the "In", the length of the feeding will increase (click the
icon of the left and right arrow below to change the size of the value change). When the nozzle spits
out the filament and spits out the set length, the feeding is completed
(3). If you want to change filament or take out filament from the printer, Click "extrude" to enter
the operation interface of Feeding and Retract, click "Out" to increase the length of retract filament,
until the filament come out from the printer head, the retract is completed, and click "Back" to
return..
(Notefeeding or retract need to be“preheat”, set the required target temperature.
Different materials may require different temperatures. PLA material is 200 degrees,
after the nozzle is heated to the set value ,then feeding or retract)
3,Print
3.1, Insert the TF card to the TF slot, TF card with sliced gcode file inside.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Easy Threed X6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Easy Threed X6 in the language / languages: English as an attachment in your email.

The manual is 2.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info