Manual Easy Threed CURA 15.04 (page 4 of 7) (English)

772485

Zoom out

Zoom in

1/7

Bottom/top thickness：

If the filling density is less than 20%,

the thickness of 0.6 mm is very easy to

cause holes on the top, and the value

of 1 mm is generally better

Fill density：

If high strength is not required, 10% is

enough. For high strength, increase the

filling ratio, but the printing time will

increase

Bottm/Top thickness:1mm

Bottm/Top thickness:0.6mm

Print speed：

This is the default speed. If the shell and

filling speed are not set separately, the

printing time is not directly proportional to

the speed. If the speed is too fast, printing

will easily cause quality problems. Generally

speaking, 40mm / S is a better speed,

According to the speed specifications of

your printer

Print temperature：

PLA starts to melt at 180 ℃, but the viscosity is

relatively large, so it is difficult to squeeze. It is

recommended to set the temperature at 190 ℃

-- 210 ℃, printing speed faster or layer thickness

thicker , and set the printing temperature a little

higher

Support type：(None，touching，everywhere)。

For the model with complex structure, it is

usually necessary to add support. Usually

choose Everywhere

none

touching

buildplate

everywhere

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Easy Threed CURA 15.04 in the language / languages: English as an attachment in your email.

The manual is 3.26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Easy Threed CURA 15.04 Manual

Product: