13
0800 / 328 6020
GT-7910A / E46337
info@globaltronicssupport.com
AFTER SALES SUPPORT
GB
IRE
00800 / 4467 5888
Close the appliance cover. This reduces the noise level of the cleaning sound. Always
connect the appliance to an approved power socket (220-240V~, 50Hz).
As soon as the appliance is connect to the socket, the red control lamp will illuminate on
the operating panel.
Start of cleaning
Press the ON button to start cleaning; The blue container illumination lights up inside the
device and goes out after completion of the cleaning process.
Timer
The appliance has an electronic 5-steps-timer. With this timer you can choose the length of
the cleaning cycle.
Please press the SET button until the display shows the desired time. You can choose a
cleaning cycle of 90 - 180 - 300 - 480 or 600 seconds.
The device switches o the cleaning process automatically after the chosen time. You can
however, manually cancel the process by pressing the OFF button.
Should the time be insu cient, simply start a new cleaning process by pressing the ON
button again. However, wait at least 3 minutes before starting the next cleaning cycle, in
order to avoid overloading the appliance.
During the cleaning cycle, use the window in the lid to control the cleaning process of
sensitive objects, and cancel the process, if necessary.
