Manual EAL APR035 (page 5 of 28) (English, German, Dutch, French)

598279

Zoom out

Zoom in

1/28

14. Next splice the black wire of the transmitter box power cable to the reverse light’s

negative (-) wire or ground.

15. Replace the reverse light bulb, and then re-install the light socket. Secure all the

wires with cable ties or electrical tape.

16. Re-attach the negative battery cable to the battery.

Monitor Installation

When choosing a location to mount the monitor, make sure the

monitor is in an area that will not obstruct your vision while driving.

1. Before mounting the monitor, clean the mounting surface well.

2. Position the suction mount to the smooth surface which suits

your requirement.

3. Press the suction cap against the smooth surface and press the

lock down to attach and fix the mount to the surface.

Snap in the monitor to the suction mount.

4. Adjust the mounting arms to suit your view angle to the monitor and tighten the

screws on the mount to fix the position.

5. Route the power cable to the vehicle’s cigarette lighter socket/12V power outlet. The

cable must not interfere with the safe operation of the vehicle.

6. Insert the small 12 Volt DC plug of the power cable into the right side of the monitor.

7. Plug the 12 Volt cigarette lighter plug into the vehicle’s cigarette lighter socket.

To maximize the effectiveness of the suction mount, it is recommended that the

application be performed under the following conditions:

 Surface temperature should be between 21 and 38 degrees Celsius.

 Application below 10 degrees should be avoided.

 Application should not occur in direct sunlight.

Mounting should be protected from exposure to direct sunlight for a period of 24 hours.

NOTE: UNDER EXTREME BRIGHT LIGHT CONDITIONS, THE SCREEN IMAGE MAY TAKE A

FEW SECONDS TO STABLIZE. PLEASE WAIT UNTIL THE IMAGE HAS STABLIZED BEFORE

BACKING UP.

System testing

1. Reattach the vehicle’s negative battery cable.

2. Turn the ignition key to the accessory position, do not start the vehicle.

3. Engage the parking brake, and then put the shifter in the reverse position.

4. After testing the unit and you are satisfied with the route you have chosen for the

cabling, you must permanently install it.

5. Route all wires behind interior panels or under carpeting so they are hidden. Use

supplied cable ties to neatly gather any excess wire.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of EAL APR035 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

EAL APR035 Manual

Product: