Manual Eagle SeaFinder 500C DF Fishfinder (page 19 of 112) (English)

469151

Zoom out

Zoom in

1/112

1. Assembling the bracket.

A. One-piece bracket: Press the two small plastic ratchets into the sides

of the metal bracket as shown in the following illustration. Notice there are

letters molded into each ratchet. Place each ratchet into the bracket with

the letter "A" aligned with the dot stamped into the metal bracket. This po-

sition sets the transducer's coarse angle adjustment for a 14° transom. Most

outboard and stern-drive transoms have a 14° angle.

Align plastic ratchets in bracket.

B. Two-piece bracket: Locate the four plastic ratchets in the trans-

ducer's hardware package. Press two ratchets into the sides of the plastic

bracket and two on either side of the transducer as shown in the follow-

ing illustrations. Notice there are letters molded into each ratchet. Place

the ratchets into the bracket with the letter "A" aligned with the align-

ment mark molded into the bracket. Place the ratchets onto the trans-

ducer with the letter "A" aligned with the 12 o'clock position on the

transducer stem. These positions set the transducer's coarse angle ad-

justment for a 14° transom. Most outboard and stern-drive transoms

have a 14° angle.

Dot

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eagle SeaFinder 500C DF Fishfinder in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eagle SeaFinder 500C DF Fishfinder Manual

Product: