Manual Eagle SeaCharter 642cDF iGPS (page 27 of 196) (English)

522017

Zoom out

Zoom in

1/196

2. Aligning the transducer on the transom.

A. One-piece bracket: Slide the transducer between the two ratch-

ets. Temporarily slide the bolt though the transducer assembly and

hold it against the transom. Looking at the transducer from the side,

check to see if it will adjust so that its face is parallel to the ground.

If it does, then the "A" position is correct for your hull.

If the transducer's face isn't parallel with the ground, remove the

transducer and ratchets from the bracket. Place the ratchets into the

holes in the bracket with the letter "B" aligned with the dot stamped

in the bracket.

Reassemble the transducer and bracket and place them against the

transom. Again, check to see if you can move the transducer so it's par-

allel with the ground. If you can, then go to step 3A. If it doesn't, repeat

step 2A, but use a different alignment letter until you can place the

transducer on the transom correctly.

Insert bolt and check transducer position on transom.

B. Two-piece bracket: Assemble the transducer and bracket as

shown in the following figure. Temporarily slide the bolt though the

transducer assembly but don't tighten the nut at this time. Hold the

assembled transducer and bracket against the transom. Looking at the

transducer from the side, check to see if it will adjust so that its face is

parallel to the ground. If it does, then the "A" positions are correct for

your hull.

Assemble transducer and bracket.

Ratchets

Flat washer

Lock washer

Flat washer

Nut

Bolt

www.Busse-Yachtshop.de email: info@busse-yachtshop.de

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eagle SeaCharter 642cDF iGPS in the language / languages: English as an attachment in your email.

The manual is 6,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eagle SeaCharter 642cDF iGPS Manual

Product: