Manual Eagle SeaCharter 640cDF (page 33 of 196) (English)

522015

Zoom out

Zoom in

1/196

Shoot-thru-hull transducer locations for

high speed or trolling speed operation.

To choose the proper location for shoot-thru-hull mounting, follow these

testing procedures: (You may need a helper to complete these steps.)

1. Anchor the boat in about 30 feet of water. Add a little water to the

sump of the boat. Plug the transducer into the sonar unit, turn it on, then

hold the transducer over the side of the boat in the water. Adjust the sen-

sitivity and range controls until a second bottom echo is seen on the dis-

play. (You'll need to turn off Auto Sensitivity, Auto Depth Range and

ASP. Try a range setting that is two to three times the water depth. The

harder (more rocky) the bottom, the easier it will be to get a second bot-

tom signal.) Don't touch the controls once they've been set.

Example of a second bottom signal. Unit is in 30 feet of water with

range set at 80 feet and sensitivity set at 87 percent.

2. Next, take the transducer out of the water and place it in the water

in the sump of the boat, face down. Notice how the signal strength de-

creases. The second bottom signal will probably disappear and the bot-

tom signal intensity will likely decrease.

3. Now move the transducer around to find the best location with the

strongest possible bottom signal. If you find a spot with an acceptable

bottom signal, mark the location and move on to step 4.

Transducer location

(trolling speed)

Transducer location

(high speed)

Second bottom

True bottom

Manual range setting

www.Busse-Yachtshop.de email: info@busse-yachtshop.de

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eagle SeaCharter 640cDF in the language / languages: English as an attachment in your email.

The manual is 6,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eagle SeaCharter 640cDF Manual

Product: