Manual Eagle FishMark 500C FishFinder (page 21 of 112) (English)

469116

Zoom out

Zoom in

1/112

holes in the bracket with the letter "B" aligned with the dot stamped

in the bracket.

Reassemble the transducer and bracket and place them against the

transom. Again, check to see if you can move the transducer so it's par-

allel with the ground. If you can, then go to step 3A. If it doesn't, repeat

step 2A, but use a different alignment letter until you can place the

transducer on the transom correctly.

Insert bolt and check transducer position on transom.

B. Two-piece bracket: Assemble the transducer and bracket as

shown in the following figure. Temporarily slide the bolt though the

transducer assembly but don't tighten the nut at this time. Hold the

assembled transducer and bracket against the transom. Looking at the

transducer from the side, check to see if it will adjust so that its face is

parallel to the ground. If it does, then the "A" positions are correct for

your hull.

If the transducer's face isn't parallel with the ground, remove and

disassemble the transducer and ratchets. Place the ratchets into the

bracket holes with the letter "B" aligned with the bracket alignment

mark. Place them on the transducer aligned with the 12 o'clock posi-

tion on the transducer stem.

Reassemble the transducer and bracket and place them against the

transom. Again, check to see if you can move the transducer so it's

Ratchets

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eagle FishMark 500C FishFinder in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eagle FishMark 500C FishFinder Manual

Product: