522012
137
Zoom out
Zoom in
Previous page
1/196
Next page
129
press to the next character and repeat until the latitude is correct.
Press
EXIT.
4. Press to
LONGITUDE|ENT. Press to change the first character,
then press to the next character and repeat until the longitude is
correct. Press
EXIT.
5. When latitude and longitude are correct, press EXIT repeatedly to get
back to the main page display.
Selecting a Waypoint
To select a waypoint on the map, use the arrow keys to center the cur-
sor crosshairs on the waypoint. A highlighted border will appear
around the waypoint.
Set a Waypoint by Average Position
This feature sets a waypoint at the current position after taking several
position readings and averaging them. This boosts waypoint position
accuracy by helping to eliminate errors caused by atmospheric condi-
tions and other factors.
1. Press
WPT| to MY WAYPOINTS| to NEW|ENT.
2. Press to
AVERAGE POSITION|ENT| to CREATE|ENT.
3. Wait while the unit takes points to get an average for the position. The
greater the number of points, the greater the accuracy. When the desired
number of points accumulates, press
ENT to create the waypoint.
4. The Edit Waypoint menu appears. You can save the waypoint by
pressing
EXIT|EXIT or you can edit the waypoint.
Set a Waypoint by Projecting a Position
This feature sets a waypoint at a point located a specific distance and
bearing from a reference position. The reference position can be se-
lected from your waypoint list, a map feature or from the POI list.
1. Press
WPT| to MY WAYPOINTS| to NEW|ENT.
2. Press to
PROJECTED POSITION|ENT| to CREATE|ENT.
3. Press to
CHOOSE REFERENCE|ENT. Use to select a waypoint, map
feature or Point of Interest. When a selection has been made press
ENT.
Use to select the reference point based on its location (nearest) or
name, then press
ENT.
4. Select the desired reference point and press ENT, which will bring up
the waypoint information window. Use to choose
SET REFERENCE at
the bottom of the screen and press
ENT.
5.Press to
DISTANCE|ENT. Press to change the first character, then
www.Busse-Yachtshop.de email: info@busse-yachtshop.de
137


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eagle FishElite 502c iGPS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eagle FishElite 502c iGPS in the language / languages: English as an attachment in your email.

The manual is 4,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info